Printable View
Hello, I have Been Using Computer For So Many Year. just now I have a Purchased New Computer and laptop and a HomeServer, also I Have a Samsung Wired printer But now I Think My I Should have Bought a Wireless Printer Can anybody please guide a Me If There are Ways to to Setup my Wired Printer into Wireless one Or Better Recommend me good Wireless Printer Thanks for your help!
Hello If you get a print server, you basically just enable it to be a device on your network via its MAC address. Once it is on, the print server should come with software that will allow you to enable printing to it from any computer within your network.I Have owned Netgear print servers
Yup Print servers would be useful as they connect printers directly to the network so that multiple PCs can share them. Compared to attaching a printer directly to a PC, the print server provides more flexibility in placing the printer, more cost effectiveness, better performance, and simultaneous support for printing from a variety of operating system environments and different network protocols. Wireless print servers eliminate the cost of network cabling, and provide the flexibility to set up a printer in a convenient location. Wireless print servers can be integrated into other 802.11 devices, such as an access point, VPN, and firewall, providing an all-in-one solution for many small businesses.
Hello, You can Check Out these NETGEAR’s 54 Mbps Wireless Print Server WGPS606 with 4-port Switch allows you to connect one or two printers to your existing wireless network, without using unsightly Ethernet cables. Simply place your printers anywhere in your home or office that works best for you, plug them into the print server’s USB ports, and the Smart Wizard set-up function automatically guides you through configuration. Then you can send your business documents to a high-end color printer, and your kids’ homework to a black-and-white printer. The print server also acts as a wireless Ethernet bridge, connecting a cluster of up to four PCs and laptops without requiring dedicated wireless adapters. I t employs powerful WEP Encryption and WPA-PSK to keep your wireless network secure, and interoperates with all standard b and g wireless devices. All this in a sleek, space-saving stand-up case.
The promise of wireless networking is, by definition, a promise of operating without wires. However, promises don't always meet expectations.
The majority of printers currently in use are not wireless by default. The capability to wirelessly print is obviously an attractive notion, but how do you make that happen? One possible solution is the ogear Wireless Printing Kit with Bluetooth technology (GBP302KIT). The kit includes everything you need to cut the printer cables connected to your PC.
What Does It Do?
The Iogear Wireless Printing Kit with Bluetooth technology is actually two pieces of hardware: A USB Bluetooth adapter and a print adapter that connect to either a USB or parallel printer port.
Both components are, of course, Bluetooth devices, which means that either should be able to connect to other Bluetooth-enabled products (e.g., a different Bluetooth adapter, PDA, possibly your camera phone and so on) if they all support the same Bluetooth profile required to connect.
Installation
The Iogear Bluetooth adapter is actually just a branded version of a Broadcom Bluetooth radio. Installation is relatively simple, at least from the point of view of plugging in the USB device, installing the included software and getting Window XP to recognize the device. Unfortunately, getting it to properly work with other Bluetooth devices, including its soul mate, the Printer Bluetooth adapter, wasn't nearly as easy or as painless.
We suspect that there are still a large number of printers that use a parallel port as opposed to USB, so it's quite beneficial that the Iogear adapter has both ports. For the purpose of this review, we tested on both USB and Parallel port printers.
One of the first things that you notice about the adapter is that it requires its own power source. So you have to plug the adapter (USB or Parallel) into your printer, which removes a wire (that being the wire that used to connect to your PC). You then replace it with another wire — the power cord, which also requires another outlet. Certainly this is just a nitpick complaint, but one of the key advantages of wireless products, for me at least, is reducing the number of wires. An extra AC adapter also always seems to take up more space than just a regular two-prong plug.
The other thing that you figure out quite quickly is that by using the Printer Adapter, you can't connect to the printer with a wired connection as there is only one port that plugs into the printer (USB or Parallel). You can't plug in anything else. It's Bluetooth or bust.
Frustration Surfaces
Using the included software to get the USB Bluetooth adapter to find the Printer Adapter, connect to it and then actually print through it was a painful and frustrating experience.
On the first attempt, we diligently followed the instructions in the woefully inadequate documentation that comes with the kit. For whatever reason, the Bluetooth adapter could find the Printer Adapter but couldn't connect to it to access its services. We called Iogear support a few times in the first few days of testing but never connected with a support person — we gave up each time after waiting more than 15 minutes (once it was 30 minutes). We tried e-mail and two days later got a reply telling me to call for tech support.
An uninstall and then re-install of the software proved successful, though over a period of several weeks of testing, we encountered intermittent failures where for some unknown reason, printing just didn't work. During the test period, the printer and the Bluetooth-enabled PC were separated by varying distances, but were always within a 20-foot range of each other. Most of the error conditions actually occurred when the distance was within three feet. We don't know if it was a pairing-related issue, an issue with one of the test printers or some form of interference that caused the intermittent error conditions. The printers all worked fine when wired.
We also experienced difficulties just trying to get the Bluetooth adapter to connect with other Bluetooth devices. In general, the Bluetooth software included with the Iogear kit was nowhere near as friendly to use as the BlueSoleil GUI-based software that SMC uses for its adapter.
One of the other serious gotchas of this product, which is not clearly indicated on the product packaging, is that the Printer Adapter doesn't work with multi-function printers. (We tested with non-multi-function USB and Parallel printers as well as one multi-function USB printer just to see if it would work — it didn't). To be fair, on the side panel of the package in somewhat small type under the title "Requirements" as the last item, Iogear does note that multi-function printers will not work with the device.
On the Positive Side
Certainly, we may be a little bit harsh here. The capability to turn a regular printer into a wireless printer is a good thing. The Iogear Wireless Printing Kit with Bluetooth technology (GBP302 Kit ) does turn your regular run-of-the-mill parallel or USB printer into a wireless device (though it doesn't actually remove wires, but instead trades a printer connection for an additional power cable). For the majority of the time, it worked flawlessly providing wireless printing capabilities. The actual printer adapter will and does connect nicely with other Bluetooth devices (not just the Iogear branded USB adapter) so if you own a Bluetooth PDA, you should easily be able to print as well.
At just under $100 for the kit, it's also not a bad value for both the PC and printer adapter. We suspect that for some people, this solution will be an ideal way to unwire their printer. For others that hit connection snags, it may turn out to be somewhat less than ideal.
Pros:
Includes both Parallel and USB interfaces
Bluetooth class 2
Cons:
Requires an extra AC adapter
Not for multifunction printers.
Only one printer can be connected
Author: Sean Michael Kerner
Hello ,Hit ebay and buy a used HP print server. I assume your printer needs USB?? This is not a wireless print server, but if you connect it to your router, you can print over the network either wired or wireless.The HP JetDirect 175x is a good solution. The HP JetDirect 310x is more advanced, however, it may be below the radar and you may get this cheaper than a 175x.You should be able to get one of these print servers for as low as $50 if you can catch a good bit. These print servers allow you all the functions for the HP All-In-Ones.
I have a wired HP All-in-one. It's not wireless so I currently have it connected to my router for use on the network. Will be moving my router away from the printer, and was wondering if I could adapt the printer to be used wirelessly. It has a USB port so can I just add a USB wireless network adapter? If not, are there any USB wireless network adapters that will work with printers? I could get a bridge, but that's expensive (probably cheaper to buy a new wireless printer).
If all of these don't work, you can also opt to buy wireless-ready printer. They usually don't need external bluetooth devices as it already comes with the unit.
You can buy a HP Officejet Pro 8000 wireless printer which has USB, Ethernet and wireless connectivity. Instead of buying print servers buying a Wireless printer is a intelligent choice. It only cost around 171$ and has all the specifications you require.
Epson WorkForce 600 Wireless AIO Printer is the best in this category as it boasts Wi-Fi connectivity features which makes it possible for multiple computers with Wi-Fi enabled to easily connect to the printer. It can also be connected with the help of the Ethernet port. It also coupled with a built in memory card slot to enable computer less printing.