How to Watch a Movie on TV from the Computer
Connecting audio.
Here are the cables connected to the sound. Connect the plug on Jack 3.5 female Jack the sound card, usually green and the RCA audio (red and white) on the scart adapter and your TV or amplifier hi-fi. If necessary, connect the Jack adapter 3.5 mm on the sound card.
Three solutions are possible for the video connection, either with an RCA cable (yellow) or S-video (SVHS) or HDMI. This brings a slight improvement in the digital image, it replaces the scart and includes digital audio.
Solution components.
Connect the video cables with a RCA cable. Insert the yellow RCA plug into the RCA socket on the graphics card, then the other end into the TV or the scart adapter.
SVHS solution.
Connect the video cable S-video. SVHS Insert the plug into the socket SVHS in the graphics card, then the other end into the scart adapter or on TV.
HDMI Solution
Connect the HDMI cable (video and audio) on the HDMI port on the graphics card and the HDMI port on the TV (HD ready or full HD).
Regarding the audio, the graphics card must be linked by an internal SPDIF cable to the motherboard that must have a SPDIF output. the cable is usually supplied with the graphics card.
Now we have set the driver for the graphics card:
The GeForce 9600 GT with HDMI TV output, the first card after the series of GeForce 9-based processor G94, the version proposed by Gainward has several advantages over a number of interesting model. For example, its frequencies of operation were increased to 700 MHz processor and 2000 MHz memory and features a new type of HDMI connector to carry high-definition video stream of 1920x1080, in non-compressed format.
The engine helps to decompress the video streams (PureVideo HD) has never been so powerful, and is almost completely unload the CPU of any video processing.
Re: How to Watch a Movie on TV from the Computer
How to set the driver for the Ati Radeon graphics card.
- Right-click your desktop and click "Properties" and on the "Settings" tab. click the Advanced tab
- click the "View" tab
- click the red tab to activate the TV
- The green buttons appear, clone mode is enabled, click the tab "Apply"
- click the TV tab in order to access the properties.
- click the tab "Format".
- Select your format or country for France choose PAL B then click "Apply" and "OK."
- You return to the "Property of (multi monitor) of your graphics card and select the" Overlay "and" Theater Mode Options ".
- select "Theater Mode", click "Apply" and "OK"
- click "Apply" and "OK" on the next window.
- If you have a Secam TV, you will see the film in black and white.
Re: How to Watch a Movie on TV from the Computer
How to set the driver for the graphics card NVidia Geforce.
- With a driver installed before 2006
- With a driver installed after 2006
Former Drivers
- Right-click your desktop and click "Properties" and on the "Settings" tab. click the Advanced tab
- click the tab for your graphics card
- Open the left pane and click 'Settings' s nView display "if it does not appear, the video cable does not properly connected.
- Select "Clone." Click "Apply"
- Right-click the icon "Television" and select the TV format. If your TV is new, the format is already selected. click "Apply"
To see the film in full screen mode only on the TV, select "Full Screen Video". NOTE: the clone full-screen video is not available with graphics processors in the range GeForce 8 or later and Windows Vista for all graphics processors.
- Select "secondary monitor" and click "Apply" and "OK."
- For maps NVidia Geforce 2005 AGP slot before, download this driver.
Recent Drivers
Right-click your desktop and click on "NVIDIA Control Panel". In the toolbar, click the tab "Advanced Settings" and select "Advanced." in the left pane, click "Configure multiple displays. In the right pane, select "Same on both displays (clone).
- Displays to be used shall be in this order: Monitor + TV.
- If your TV DOES NOT APPEAR, check the video cable connection
