Results 1 to 3 of 3

Thread: Need Windows 7 64 bit compatible FireWire drivers for Sony DSR-11 DV

  1. #1
    Join Date
    Apr 2012
    Posts
    18

    Need Windows 7 64 bit compatible FireWire drivers for Sony DSR-11 DV

    Yesterday i reinstalled my computer and installed Windows 7 64 bit (earlier it was 32 bit). Everything went fine but the problem am facing now is with the drivers. Especially with my Sony DSR-11 DV DVCAM. Whenever am try to connect it with my system, it wont detect my DSR anymore. There few more problems with this due to the required drivers.

    I tried to search FireWire driver on web for windows 7 64 bit and Sony DSR-11 DV, but dint got any. But still for a try i tried few drivers including legacy and Texas instrument driver but noone of them worked. Anyone has any solution for these then please post.

    If you require my complete system config, here it is:
    • Intel Core i7 2700K
    • Intel DZ77GA-70K Board
    • Se-agate 500 GB hard drive
    • 3 x 4GB Kingston DDR3 RAM
    • Windows 7 64 bit.

  2. #2
    Join Date
    May 2011
    Posts
    397

    Re: Need Windows 7 64 bit compatible FireWire drivers for Sony DSR-11 DV

    Well, in such cases you have just ways to get the required drivers for your system and DSR-11. First, scan the official site with proper product code. They must have its drivers. Other than this, you can try searching the drivers from Windows Update. Just connect the device with your computer via USB Cable and turn on Windows Update. Let it search for few minutes. Once it is done, it will show the drivers if available.

  3. #3
    Join Date
    Jul 2011
    Posts
    352

    Re: Need Windows 7 64 bit compatible FireWire drivers for Sony DSR-11 DV

    Even i had very similar problem after formatting and installing W7 64 bit. Actually 64bit operating systems usually create driver issues. In my case i was having oscillator devices which were creating problems while connecting via 1394 firewire port. I tried many thing but nothing was helping me out. At last i bought a third party firewire PCI card having 1394A 4 pin port and extra usb port. Installed it with its driver (driver came along with the device) and now my device is detected by W7 64 bit and offcourse working perfectly. You can try out the same as well.

Similar Threads

  1. Need windows 7 compatible drivers for HP ScanJet 5370c
    By sAmPaDa in forum Windows Software
    Replies: 6
    Last Post: 13-10-2011, 10:29 PM
  2. Not able to install Sony Handycam firewire in windows 7
    By Westlife in forum Portable Devices
    Replies: 3
    Last Post: 09-12-2010, 06:11 PM
  3. Windows Vista + Sony Handycam + Firewire = Problem
    By Kordell in forum Portable Devices
    Replies: 5
    Last Post: 29-09-2010, 03:08 AM
  4. Drivers & programs compatible with Windows 7
    By Plex in forum Windows Software
    Replies: 4
    Last Post: 11-04-2009, 11:27 AM
  5. Windows 7 compatible with Vista / XP drivers ?
    By Larry ward in forum Operating Systems
    Replies: 3
    Last Post: 24-02-2009, 05:32 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,708,944.00878 seconds with 17 queries