Results 1 to 11 of 11

Thread: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

  1. #1
    Join Date
    Jun 2011
    Posts
    85

    Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    I just bought a Black Armor NAS 110 and I am replicating all my private files (pictures, motion pictures, and so forth.) to the 110. The dialog window that Windows utilizes when transferring files states that my present rate is ~11 MB / sec. The 110 is associated to my Netgear WNDR3700 Gigabit router (utilizing a standard Ethernet link). Unless my math is incorrect Gigabit indicates 1000 bps = 125 MB / sec. Why could you suppose then that I am just getting a transfer rate of 11 MB / sec?

  2. #2
    Join Date
    Jul 2011
    Posts
    1,580

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    Are you utilizing a gigabit Ethernet card in your PC simultaneously and is it associated straightforwardly to your Router, or is it joined via a Wireless WiFi Connection or maybe utilizing a slower ehternet card express a 100mb as an alternate. Could not quite response the issue without knowing how the entire network way is setup. A Gigabit is as a matter of fact 1000mbps (megabits/sec) or depending on if you feel a distinct desire to reveal to it as actually bps (bits/second) that could be 1,000,000,000bps but your math is right for stating it in MegaBytes/Sec-Theoretically without every last trace of the overhead it could be 125MBps (Mega Bytes/Sec).

  3. #3
    Join Date
    Jul 2011
    Posts
    1,577

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    It utilizes Giga Ethernet and clearly has 7200RPM HDD; it transfers data similar to a pig. Supposedly support prompted the 220 transfer at around 24MB (peruse it here an as yet undisclosed place) while I've viewed evaluates' demonstrating the 110 is somewhat snappier (20.1 vs. 20).

  4. #4
    Join Date
    Aug 2011
    Posts
    1,224

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    I am able to get it to transfer at 13MB-17MB but that would be it. I'm independently purchase this buy as my WD MyBook Elite permits transfers much higher, utilizing USB2.

  5. #5
    Join Date
    Aug 2011
    Posts
    2,186

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    Same with me-Earlier, I was stayed at transfer rates of KB/s in light of the fact that I had it associated to my dlink switch, now that its caught to the router its 'preferable' (absolutely underprivileged for a supposed giga NAS).

  6. #6
    Join Date
    Aug 2011
    Posts
    1,855

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    I outline Ethernet units professionally. Virtually no regular home PC unit can maintain GigaBit data rates (128 Mbytes / sec) for any time span, specifically hard disk drives. Truth of the matter is that there are numerous explanations this is so. To begin with is that Ethernet has some overhead, significance that not every last trace of the parcel being sent is your data. Second is in light of the fact that computer OS's (like Windows and OS X) are more concerned with trustworthiness and support for the numerous methodologies utilized on the Internet than making things totally speedy. Third, hard disks expound on the subject of SATA speeds, but this is a blast rate. Exact most extreme data transfer rates to hard disks for extraordinary data sets is ordinarily less than 30-40 Mbytes / sec, best equipped case.

  7. #7
    Join Date
    Jul 2011
    Posts
    2,085

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    Slower disks (like 5400 rpm or laptop disks) will see more like 20-30 Mbytes sec. This is an immaculate rate in a test PC running a speed estimation utility. Not sending data over Ethernet in a PC with different modifies running away from anyone's notice. So while you are able to get NAS boxes that are quicker than the BlackArmor 110, they all price a part more, and none are 10X preferable, unless they have something like RAID5 and price > $400+.

  8. #8
    Join Date
    Aug 2011
    Posts
    1,948

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    Putting it into point of view, while a straight USB connection promises 480Mbps, or 60 Mbytes/sec, you will never see this speed with a specific non-RAID disk either. Again, this is a blast rate. While it will be snappier than the 110, it will no doubt not surpass 2X this speed for expansive transfers. Don't be confounded by speedy transfer numbers. Windows does buffering, which indicates that while you think you're finished, the data isnít transferred yet. Don't unplug that head for a touch, or your data won't be there yet. It makes for fantastic numbers, but they aren't legitimate.

  9. #9
    Join Date
    May 2011
    Posts
    1,741

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    "When transferring files states that my present rate is ~11 MB / sec." This looks to me like a 100 MBit association, not a gigabit connection on the grounds that its a normal data rate for a 100 MBit network. (When the arrangement is the restricting component. 100 MBit/s = 12 MByte/s). Please check that both devices, the NAS and the PC have a GBit connection and no 100 MBit in between.

  10. #10
    Join Date
    May 2011
    Posts
    1,731

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    I just purchased the NAS110, as a single unit with a new GigaBit router and caught it. Duplicating utilizing Windows was terribly slow (well, it is NTFS...) I switched to the raised-in FTP server.

  11. #11
    Join Date
    Jul 2011
    Posts
    1,820

    Re: Getting low Transfer Rate speed in BlackArmor NAS110 Transfer Rate

    I am as of now slogging in at around 25 MByte/sec. Appears properlyslow to me, seeing that it is supposed to be a GigaBit device. I had trusted for around 2 to 3 times that number. Seeing the illustration above I could probably type of comprehend that now. Yet still, seeing that the connection speed is hanging out at around 22% (as per the undertaking boss) and that I anticipate faster things from my hard drive, I don't get why the transfer is so moderate.

Similar Threads

  1. Disk Data Transfer Rate, 5.9 on an SSD
    By Rozamond in forum Hardware Peripherals
    Replies: 3
    Last Post: 06-04-2011, 02:30 AM
  2. Low transfer rate over Ethernet LAN
    By Virendra 89 in forum Networking & Security
    Replies: 3
    Last Post: 02-02-2011, 11:06 AM
  3. Transfer rate in Wireless LAN are extremely less
    By Ojoyku in forum Networking & Security
    Replies: 4
    Last Post: 07-12-2010, 09:31 PM
  4. How to increase transfer rate ?
    By MAURO in forum India BroadBand
    Replies: 2
    Last Post: 03-04-2009, 05:50 PM
  5. Slow network transfer rate
    By Harsh01 in forum Operating Systems
    Replies: 2
    Last Post: 11-02-2009, 02:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •