Packard Bell EasyNote R1934 display Scrambled

[Aislinn]

I have a display problem with my laptop Packard Bell EasyNote R1934. Here are the symptoms: When I switch it on, the picture is horrible (even before arriving on Windows). It scrambles (vertical or horizontal), and becomes clear at times when I move the screen or I hit the deck (I can sometimes get a normal picture by pressing the upper left corner of the slab, but it is increasingly rare).

[Macarenas]

In most cases, failures are connectors. So brace the water in the middle, move one side then the other to see which problem. Then try a clean contact with appropriate product. Finally, if not good, find a setting (soft) connector that is satisfactory. (Foam, rubber, ...) Of course, all this delicately. So you should try to get this problem resolved by changing the monitor cables.

[Aislinn]

The problem is solved: There was indeed a loose connection, but at the connection between the slab and its CI (very very tricky ). It was very much sensitive that touching the water at the CM moving this connection. I installed the IC and everything is OK. Hope this may help someone with a similar problem ..

[Gaige]

Problem with packard bell aged 3 years. For some time the screen of my easynote this area seems strange that grow over the . A noted that this area does not appear on the image when I make a screenshot by appropriate software. Can someone help me to get this problem resolved. Any help in this matter would be appreciated.