C905 Wifi problem

[Mahish]

Hi all,

I have C905 mobile that have Wi-Fi capabilities, plus wireless Internet access at home can also, of course, give it a try. Simple settings, the router, Wi-Fi phone is open, go to the link page, and soon after hooked up. (Hate is now GPRS is excruciatingly slow, wireless Internet access is to use AD, the approaching death) phone the top left corner shows the signal strength, cell phone machine immediately with the Air Field, the next thing. But did not last long, even when the next day display (Communication failure! Please try again or contact your carrier); I direct collapsed telecommunications will not be found, disconnect my internet; after I use GPRS on all normal; Why is wireless Internet access, display and can connect to the Internet, but not the next day, the reasons for that, please help. Thanks in advance.

[Regina]

Sony Ericsson Internet Setting (tested) are:
The first new data account: \ menu -> phone settings -> Connection -> Data Communication -> Data Accounts -> Add Account -> PS Data -> type "Data account name (eg: GPRS)
User Name: Empty
Password: Empty
Then select "Save."
Select the data account you just the new name (eg: GPRS), left "Edit."
APN: cmwap
User Name: Empty
Password: Empty
Login Request: Off
Optimization Services: Automatic
IP Address: empty
DNS address: null
Verification: None
Compression: Off
Title Compression: Off
Return.
Check the setting and reply.

[Pugsly]

You need to set the settinf as follows: Go to Menu -> phone settings -> Connections -> Internet Settings -> Internet mode -> New Model
Name: model name, such as: GPRS
Connection: Choose a first step new data account, if: GPRS
You just select the new Internet model - (for example,: GPRS), click "Settings."
Connection: Select the first step the new data account, such as: GPRS
Use proxy: Yes
Proxy Address: 10.0.0.172
Port number: 80
User Name: blank
Password: Empty
Select "Save."

[Gonzo]

Check the settings as follows:
(1) Go to Settings -> Connection Settings -> Open the access point -> options -> New Access Point -> Use default settings ->
(2) connection name (where you can casually named, such as: HOME) -> Data bearer -> Select "Wireless LAN" -> WLAN access point name (select Automatic Search) -> Network Status (Open) - -> WLAN network mode (infrastructure network) -> WLAN security mode (if the password before the router has been set, here select "WEP",, if not set a password here is "open network"
-> WLAN Security settings (WEP key using the "# 1" -> identification of the type "open" -> WEP encryption, "64" -> WEP Key format "Hexadecimal" -> WEP Key "1122AABBCC"
Re-enter the home page, and then open the network to complete the process, check and reply.

[Bon-Z]

WIFI is AP (Access Point) and wireless LAN consisting of wireless networks. General set up a basic wireless network is equipped with a wireless card and AP, so can use the wireless mode, with the existing cable infrastructure to share network resources, the construction cost and complexity of the process is far lower than traditional wired networks. If only a few computers in the peer, but also not to AP, only each computer with wireless card. AP generally translated as "Access Point", or "bridge". Check and reply.

[Venator]

Local connection to open on-line software to automatically connect WIFI on the condition that you first connect WIFI! ! ! First search WIFI network! Then connect! Hope its work. You just start to open WIFI, search around the signal, the connection you need to connect the network, enter the password you can access the Thanks.