Satellite A500 Display Problems

[Mrigankasekhar]

Hi all,

Recently i bought a new Toshiba Satellite A500 Laptop, the laptop came with Windows Vista Home Premium OS, and it works fine. I have seen some faded colors and lines on the screen. Can anybody have any idea, what can i do to resolve this issue. Check and reply.

[Ernest]

You need to do following three files to C: \ windows \ system32 inside, If you can not copy to skip.
Last order: Start - Run - enter

- Regsvr32 Proppage.dll
- Regsvr32 directSpy.dll
- Regsvr32 Quartz.dll

Successful, restart, finished.

All the best.

[Venator]

First tell it what model your graphics card, look in the device manager. Then go to the appropriate manufacturer. Or go directly to Toshiba's Web site to find, also because of this , u will fave the issue. Check and reply.

[Quentin]

Start as a admin to Satellite A500 of the control interface, the manual adjustment of color, no matter how matching, color display is not normal, unloaded, reloading "super king "The question remains the same, note the" super king "has nothing to do. With "Paint" to open a free color rich image files, observe the entire picture color is yellow, this graphics card driver suspected problem. See "Control Panel" < "System" < "Device Manager" < "Display Adapters" under the graphics driver for Toshiba's S3 VIRGE-MX (260). So special access to "Lenovo Toshiba Online Club" downloaded 2520CDT laptop graphics driver under Winvista, this is called "s254vid8" compression package produced after extracting the driver disk. Delete the original driver, wearing just download the display driver, the check image color, color, or yellowish. Thus, the software checks the end, into the hardware check, decided to "replacing" test video card and LCD display is good or bad. Add in the notebook computer, a desktop monitor is working correctly, and then "display" attribute set to show output to LCD / CRT, press "F4" key to switch to the LCD screen and monitor the work of the state, while comparing the two, was found The latter play VCD and display pictures color were normal, thus concluded that a problem with the LCD screen. Replace it with a new LCD screen, the display color returned to normal troubleshooting.

[Paxton]

Debug port memory dump images to tell the user whether the business is written to disk, and use the memory dump image can determine the nature of problems, but also to tell whether the user is debugging information to another computer business, and what port to use complete the communication. However, the information here is for general users, is meaningless. Sometimes security section which can smooth the production team found that the problem will be clear in the first part of the report is the document which committed the wrong, but often It can only check them about the scope of the problem can not be clearly identified. Because the factory was forced to stop fully, only to re-start consolidation, sometimes, the production team will realize that mistakes are not repeated. but sometimes still try to loot parts So leaders have to repeat the plant shutdown decisions (can not start and display the blue screen information, or during the same operation again, blue screen). All the best.

[Simond]

For the newly installed computer problems are often blue, should check and update BIOS to the latest version, which also shut down memory-related item, such as: cache and mapping. In addition, should the control of Microsoft's hardware compatibility list, check your hardware. There is If the motherboard BIOS can not support large-capacity hard disk can lead to blue screen, need to be upgraded. All the best.