Page 1 of 3 123 LastLast
Results 1 to 15 of 38

Thread: How to restore factory setting in china mobile

  1. #1
    Join Date
    May 2009
    Posts
    2,106

    How to restore factory setting in china mobile

    Hi all,

    i am using china mobile phone, there are some setting in my mobile is changed accidentally, and it hanged every time. I want to reset my chine mobile by factory setting. but there is no option i found it, can anybody tell me how can i restore. Please help.

  2. #2
    Join Date
    Oct 2008
    Posts
    1,066

    How to restore factory setting in china mobile

    i have some code for resting china mobile. Please try on your mobile :
    #77218114#
    #881188#
    #94267357#
    #9426*357#
    #19912006#
    #118811#
    #3646633#

  3. #3
    Join Date
    Oct 2008
    Posts
    951

    Re: How to restore factory setting in china mobile

    i have a china mobile and recently i Restore the factory settings by *#987*99#. It will also work by *#987#. You can also check some code for
    Code:
    Set Factory Mode CONFIRMED *#66*# 
    show Software Version CONFIRMED *#8375#
    A2DP ACP Mode CONFIRMED *#1234# 
    A2DP INT Mode CONFIRMED  *#1234#.

  4. #4
    Join Date
    Dec 2008
    Posts
    950

    How to restore factory setting in china mobile

    I have China mobile phone M002L. I have used different code like:
    default user code: 1122, 3344, 1234, 5678
    Factory mode: *#987#
    Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
    Restore factory settings: *#987*99#
    software version: *#800#
    software version: *#900#
    set default language: *#0000# Send
    set English language: *#0044# Send
    set English language (new firmware): *#001#.
    Try it and reply. Best of luck.

  5. #5
    Join Date
    Oct 2008
    Posts
    780

    Re: How to restore factory setting in china mobile

    You can also reset your china phone by menu option. But you require password for that. The password is 00000. Also check the following useful codes.
    GM208 engineering menu: *#66*#
    Set language to English: *#0044#
    Set language to Russian: *#0007#

  6. #6
    Join Date
    Feb 2010
    Posts
    1

    Re: How to restore factory setting in china mobile

    I have mobile phone E71 with WIFW<TV<dual SIM card...Made in CHINA.THis is CHinese model of the Nokia E71.I hed problem with Dialing end I entered a dangerous code *#6810# That DISABLED the ENGINEERING MENU end several other codes.Theres has to be a reversing code for *#6810# so I can enter again to engineering mode...Help me

  7. #7
    Join Date
    Oct 2010
    Posts
    1

    Re: How to restore factory setting in china mobile

    hi when i type this code #881188# it appears IMSI: 515051050203398

    can help me what it is?

  8. #8
    Join Date
    Apr 2009
    Posts
    65

    Re: How to restore factory setting in china mobile

    hi when i type this code #881188# it appears IMSI: 515051050203398

    can help me what it is?
    After pressing that code, you are getting an International Mobile Subscriber Identity. An International Mobile Subscriber Identity or IMSI is an exclusive recognition linked with all GSM and UMTS network mobile phone users. It is accumulated as a 64 bit field in the SIM within the phone and is sent by the phone to the network. The IMSI can be utilized in some mobile network that interconnects with other networks, in meticulous CDMA and EVDO networks as well as GSM networks.

  9. #9
    Join Date
    Mar 2011
    Posts
    2

    Re: How to restore factory setting in china mobile

    I have an h2000 phone how and where do I go about resetting it to factory settings. I did a hard reset and now it won't recognize my sim card so I can only make emergency calls. Where do i type these codes in???

  10. #10
    Join Date
    Jan 2006
    Posts
    6,878

    Re: How to restore factory setting in china mobile

    Quote Originally Posted by racermpn View Post
    I have an h2000 phone how and where do I go about resetting it to factory settings. I did a hard reset and now it won't recognize my sim card so I can only make emergency calls. Where do i type these codes in???
    I think there might be a software crash problem with your mobile phone so you will have to either flash the mobile phone or maybe go to a mobile repair shop and they might do it for you but on a charge, means you will have to pay some penny for it. Other than that you can try out other restore codes that are listed here - China Mobile Secret Codes
    All Chinese mobile phone Secret Codes

  11. #11
    Join Date
    Mar 2011
    Posts
    2

    Re: How to restore factory setting in china mobile

    Thats the problem I am having where do I enter these codes at????Since it won't recognize my sim card I can't use the dialer cause its only for emergency calls. Is there another place to enter these codes at??

  12. #12
    Join Date
    Nov 2005
    Posts
    930

    Re: How to restore factory setting in china mobile

    If that is not recognizing your SIM card then you can take some other working SIM card and insert that in your phone and then try to apply those codes and see if they are working for you. Once you are done with that then you can insert your SIM card. This is the only thing that I can suggest you at the time. I hope that this will help you.

  13. #13
    Join Date
    May 2011
    Posts
    2

    angry Re: How to restore factory setting in china mobile to an earlier date

    hey i av a zte nj35_09a mobile phone i usually can send messages and go on the internet since i put a memory card in it i cant do anything again do any1 no any software that can restore the phone to an earlier date or to flash the phone plz help this thing that happen let me get plz help

  14. #14
    Join Date
    Mar 2010
    Posts
    2,578

    Re: How to restore factory setting in china mobile

    I donít know how your memory card restricted the SMS sending and internet. So to troubleshoot this issue you need to try and remove the memory card and then see where the messages are in use now or not if everything is fine in the absence of memory card then I donít want you to use that card again because it might be corrupted so try and replace that one.

  15. #15
    Join Date
    May 2011
    Posts
    2

    Re: How to restore factory setting in china mobile

    i already do that take out the memory card and i also try to restore factory settings do u no any software that can reprogram the phone

Page 1 of 3 123 LastLast

Similar Threads

  1. how to restore the Factory setting in Asus Eee 70x pc
    By Naranbaatar in forum Portable Devices
    Replies: 6
    Last Post: 08-08-2011, 10:30 AM
  2. how to factory restore nokia 2600 mobile
    By Pagavan in forum Portable Devices
    Replies: 3
    Last Post: 31-01-2011, 05:10 PM
  3. Code to restore the factory setting for sgh-f480v
    By Bon-Z in forum Portable Devices
    Replies: 3
    Last Post: 11-12-2009, 02:04 PM
  4. How to restore factory setting in Packard Bell computer
    By Enriquee in forum Operating Systems
    Replies: 4
    Last Post: 05-12-2009, 04:00 AM
  5. Restore factory setting of Compaq Presario cq60 laptop
    By KANAN14 in forum Portable Devices
    Replies: 3
    Last Post: 04-12-2009, 03:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •