Realistic STA 2700 stereo receiver

[Gonzo]

Realistic STA-2700 AM/FM Stereo Receiver combines 100 watts per channel of clean power, efficient state-of-the-art circuitry, and a full- function wireless remote control. This combination gives you the power to accurately reproduce any signal source (including a CD player) and drive any home speaker system. Plus, you can control most of the features of your stereo system from your easy chair.

The CMOS LSI frequency-synthesized tuner and the large digital frequency display make radio tuning both precise and simple. And the FM sections dualgate MOS FET front-end reduces the possibility of overloading by strong local signals.

The STA-2700 provides connections for two tape decks, a turntable, and three other audio signal sources (CD player, VCR, and TV, for example).This is ideal for the large number of components in today's combination audio/video systems.

[Gonzo]

Features of Realistic STA 2700 stereo receiver

• Flat Frequency Response : Assures accurate sound reproduction from 15 to 25,000hertz.
  
  
• Low Distortion : You use the full power of the amplifier without compromising the sound quality.
  
  
• Three "Detented" Tone Controls : Allow independent adjustment of bass, treble, and midrange frequencies.
  
  
• Two-Way Tape Dubbing :Lets you copy tapes to or from either tape deck, while listening to another signal source. Of course, you can monitor either tape deck if you wish.
  
  
• Six Tuner Memory Buttons : let you program six AM and six FM radio stations for one-button tuning.
  
  
• FM Mute :Eliminates noise when you tune from one FM station to another.
  
  
• Sub Filter : reduces low-frequency noise that wastes amplifier power, without adversely affecting the low-frequency portion of the program material.
  
  
• Terminals for External Antenna : let you connect external AM and FM antennas for optimum radio reception. However, the supplied AM loop antenna and the FM line-cord antenna provide adequate reception in most metropolitan areas.
  
  
• Protection Circuits : help prevent damage from overheating or overdriving of the amplifier. The STA-2700 is also fuse-protected from power surges and short circuits.

[Gonzo]

Specification of Realistic STA 2700 stereo receiver

1. AMPLIFIER
   
   
   • 100 watts per channel(minimum RMS power, both channels driven)
   • IM Distortion (80 watts, 60/7,000 Hz):0.01%
   
   
   
2. Phono Equalization :RIAA +/- 2 dB
   
   
3. Tone Control Action:
   
   
   • Bass : +/- 10 dB at 100 Hz
     
   • Midrange :+/- 6 dB at 1.5 kHz
     
   • Treble :+/- 10 dB at kHz
   
   
   
4. Total Harmonic Distortion (80 Watts):
   
   
   • 20 Hz=0.01%
     
   • 1 kHz=0.01%
     
   • 20 kHz=0.02%
   
   
   
5. Loudness Compensation : (-30 dB):
   
   
   • 10 kHz=+4 dB
   • 100 Hz=+6 dB
   
   
   
6. FM TUNER
   
   
   • IHF Sensitivity (3% THD) : 1.7 microV, IHF (9.8 dBf)
   • Limiting Sensitivity (-3 dB): 1.2 microV (6.8 dBf)
     
     
   • Signal-to-Noise Ratio:70 dB
     
     
   • Capture Ratio: 1.5 dB
   
   
7. Image Rejection:70 dB
   
   
8. IF Rejection:85 dB
   
   
9. Selective:70 dB
   
   
10. Stereo Separation at 1,000 Hz: 52 dB
    
    
11. Sensitivity (for 20 dB S/N):
    
    
    • Radiated : 350 microV/m
      
    • Terminal : 25 microV
      
    • Image Rejection : 40 dB
      
    • IF Rejection : 40 dB
      
    • AGC Figure-of-Merit : 50 dB
      
    • Total Harmonic Distortion (10 mV/m) : 0.8%
      
    • Signal-to-Noise Ratio (10 mV/m) : 45 dB
      
    • RF Interference Rejection : Rated Excellent
      
    • Power Requirements : 120 VAC, 60 Hz, 340 watts max.(240 VAC, 50 Hz for Australian Models)
    
    
    
12. Weight (Net) : 23.3 lbs lbs (10.6 kg)