Go Back   TechArena Community > Hardware > Overclocking & Computer Modification
Become a Member!
Forgot your username/password?
Tags Active Topics RSS Search Mark Forums Read

Reply
 
Thread Tools Search this Thread
  #1  
Old 21-03-2012
Member
 
Join Date: Jan 2012
Posts: 47
Overlcocking Intel Core i5-2500K on MSI P67A-C43

here is the hardware configuration of my computer.
Quote:
Intel Core i5-2500K
MSI P67A-C43 (b3 rev)
1x 4GB Corsair XMS3 PC3-1333
BFG GTX260 896MB 55nm
Corsair HX520
Corsair H50 cooler
I wanted to overclock my CPU but could not get anything which will help me to make the thing working for me. Personally I am looking to reach 5GHz.
Any help will be appreciated. Thanks a lot in advance.
Reply With Quote
  #2  
Old 21-03-2012
Member
 
Join Date: Mar 2011
Posts: 210
Re: Overlcocking Intel Core i5-2500K on MSI P67A-C43

Well in this particular situation I wanted tell you that you can reach upto 4.5GHz by having Vcore / Vcc of 1.30V. QPI/VTT should be set at 1.12V. System Agent Voltage should be set at 1.135V. the DRM voltage should be set to according to all the modules are rated. If you are having Load-Line Calibration option then you should take care of the thing that it should be set enabled and VDroop Control should be set to high.
Reply With Quote
  #3  
Old 21-03-2012
Member
 
Join Date: Jan 2012
Posts: 47
Re: Overlcocking Intel Core i5-2500K on MSI P67A-C43

Hey thanks a lot for the prompt replies of. I used the instructions which you have stated over here. unfortunetly my system is getting crashed and getting BSOD xxx0124 on my computer. also I was not able to get an option for vcore settings. If you are anything to share let me know as early as possible.
Reply With Quote
  #4  
Old 22-03-2012
Member
 
Join Date: Jul 2011
Posts: 121
Re: Overlcocking Intel Core i5-2500K on MSI P67A-C43

You should set 1.3v in BIOS with Vdroop Control which is set to high vdroop. It should show 1.272v idle. From Windows when you are supposed to running Prime the Vcore would be lower than that of ~1.25v in CPUz and it could be the root cause of BSOD. Well you will require to increase set vcore in BIOS to keep the load vcore in Windows at the higher level or you should change Vdroop Control to the low vdroop. This particular thing would rise Windows (CPUZ vcore) with stress load little bit.
Reply With Quote
Reply

  TechArena Community > Hardware > Overclocking & Computer Modification
Tags: , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "Overlcocking Intel Core i5-2500K on MSI P67A-C43"
Thread Thread Starter Forum Replies Last Post
Intel Core i5 2500K versus Intel Core i3 2120 for gaming Tech^Geek Overclocking & Computer Modification 8 01-04-2012 11:58 AM
Power is still ON after shutdown the computer consist of Intel i5 2500K and Gigabyte GA-P67A-UD4-B3 Ansuna Motherboard Processor & RAM 3 07-12-2011 12:08 PM
Building a system using MSI P67A-C43 (B3) with INTEL i5-2500K SANKALPA Motherboard Processor & RAM 7 13-10-2011 10:27 AM
better between intel core i5 2500k and intel core i7 2600k for multitasking and multithreading Gunwanti Motherboard Processor & RAM 5 03-08-2011 12:02 AM
Considering switching from Intel Core i5-2500K to Intel Core i7-2600k Jagad Motherboard Processor & RAM 5 21-03-2011 10:34 AM


All times are GMT +5.5. The time now is 11:03 AM.