Go Back   TechArena Community > Hardware > Overclocking & Computer Modification
Become a Member!
Forgot your username/password?
Tags Active Topics RSS Search Mark Forums Read

Reply
 
Thread Tools Search this Thread
  #1  
Old 30-09-2011
Member
 
Join Date: Jul 2011
Posts: 56
Overclocking Gigabyte Z68X-UD5-B3 and 2500k

In this way my system is steady nevertheless when I attempt to run Prime95, the CPU multiplier value changes when CPU is in full Load why? I imagine I have to change the TPL value (default is 95w) nevertheless BIOS doesn't permit me to adjust this value without enabling Intel Turbo Mode.

Moreover I haven't understood how LoadLine Calibration works, with my old Mobo (Socket LGA 755) LoadLine standards were enabled or Disabled. Now I have 10 dissimilar values (from Level 1 to Level 10) nevertheless I don't know what the most excellent value I be supposed to choose .
Reply With Quote
  #2  
Old 30-09-2011
Member
 
Join Date: May 2008
Posts: 470
Re: Overclocking Gigabyte Z68X-UD5-B3 and 2500k

I tried many solutions and now I reach steadiness with following parameters:
  • PLL 1.88
  • QPI/VTT 1.10
  • VCore 1.24
  • LLC 8
  • Internal PLL Overvolt Enable

Linux runs fine without errors and temperatures are diminish to 65,70,67,71.I still have trouble with Prime95.when I sprint it my multiplier are distorted when CPU is in full load. Besides I have several trouble with Intel Extreme Tuning utility, it couldn't distinguish CPU temp of my board. I imagine that Z68 chipset is not supported well by all diagnostic software?s.
Reply With Quote
  #3  
Old 30-09-2011
Member
 
Join Date: May 2008
Posts: 389
Re: Overclocking Gigabyte Z68X-UD5-B3 and 2500k

Obviously make sure that you have downloaded all the most recent versions of the programs that you are using for reporting. Also if one program sounds suspiciously out check it with another.
Reply With Quote
  #4  
Old 30-09-2011
Member
 
Join Date: Jul 2009
Posts: 969
Re: Overclocking Gigabyte Z68X-UD5-B3 and 2500k

I was capable to acquire my 2500k stable at 4.6 GHz through a CPU VCC at 1.35 and running my RAM at 1.54.I have a Zalman 9500CNPS on apex of mine and my temperature are 28c idle and 70c using Intel Burn Test. I make use of Core Temperature to determine the temps they have a new-fangled version that is well-matched with the SB.I make use of CPU-Z to test my RAM and CPU settings.
  • Turbo - Disable
  • PLL Overvolt ? Enable
  • LLC - 10
  • RAM VCC - 1.54
  • VCore - 1.35
  • PLL - 1.80

No matter what I do I can't go any further. X47 sets me into a constant reboot. I'm happy at 4.6 so I'm not going to push it.
Reply With Quote
Reply

  TechArena Community > Hardware > Overclocking & Computer Modification
Tags: , , , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "Overclocking Gigabyte Z68X-UD5-B3 and 2500k"
Thread Thread Starter Forum Replies Last Post
Overclocking i5 2500k with Gigabyte-P67A-D3-B3 Ooghavanth Overclocking & Computer Modification 5 14-10-2011 10:17 PM
Overclocking Intel i5 2500k with Gigabyte Z68XP UD3 Diamond! Overclocking & Computer Modification 3 07-10-2011 11:06 PM
Overclocking i5 2500k with Gigabyte z68xp-ud4 Jozefa Overclocking & Computer Modification 4 30-09-2011 10:43 PM
Overclocking of Intel core i7 2600k on Gigabyte z68x-udh3-b Gaganvihari Overclocking & Computer Modification 5 04-08-2011 10:56 PM
Overclocking of Intel Core i5 2500K on GIGABYTE h67a-ud3h-b3 Quasim Overclocking & Computer Modification 6 04-08-2011 10:56 PM


All times are GMT +5.5. The time now is 04:31 PM.