Core i5 750 overclock on Asus P7P55D

[NAKKIRAN]

Here, I try to o / c my proc. in order to remain in the standards, get something stable and positive without problems, so here's my config:
- CM: Asus P7P55D
- Proc: i5 750
- G. Skill RAM Kit Extreme3 2 x 2 GB PC10600 Ripjaws
- Venti: Cooler Master Hyper TX 3
- PSU: Corsair TX - 650W
avec window 7 x64 with windows 7 x64 To be brief, I intend to mount it between 3.4 and 4GHz (with or without T. Boost, seeing, I would follow your advice anyway). I'm looking more precisely a form of a Bios P7P55D already configured for a good o / c simply intelligent, and while we're at it, some good advice about my config (especially PSU and Cooler) is whether those take the road. Thank you very much in advance, soon.

[MaCiNToSHeR]

In view of your cooler, it tests:

• overclock / manual
• CPU ratio / 21
• Intel Speed / Off
• XtremPhase / activated
• BCLK / 160
• ECDL / 100
• DRAM / 1600
• CPU voltage / manual
• Fixed Voltage / 1.25
• BMI volt / minimum
• DRAM / 1.6V
• CPU PLL volt / 1.5
• PCH volts / 1.10
• Lead line clibration / activated
• Spectrum CPU read / disabled
• spectrum pcie / disabled

[Wampanoag]

Agree the round piece the size of a coin of 5 cents. Other than that, once arrived in the BIOS, I cannot change the CPU ratio, BCLK, PCI (impossible to move the auto mode) and then for DRAM, I can only go up to 1333. In short, there is something to tweak my settings before, or I am no more than I thought. So this is the issue which is currently facing by me. So any suggestion will be appreciated.

[Abhibhava]

Regarding this point I am agree thank you, Therefore, Clear CMOS made the change:
- My computer is really noisier (as if turning my rad to block non-stop)
- More "Express Gates Is Not installed" on startup
Apart from that, I am still not able to make my changes in the BIOS . And in this my main question how to run the BIOS?

[Deepest BLUE]

Okay thank you, that is, after flashed, I got no change alas, still no way to change the BIOS settings as desired. What misery, there would be nothing that would not install the supplied drivers & utilities disk Asus for example? (Ps: My Rad is still noisy, it's weird). So please help me as soon as it is possible for you guys. Regarding this I have visited many of the forum sites but not succeeded.

[Jacob.d]

I bought this computer already installed (I did go), so I'll assume for my rad, there was a default setting managed by the BIOS, as I delivered the coup all parameters to factory , it has jumped from. I have a feeling that my rad to block rotates in fact, noise is monstrous. So this is only I know about this I hope this will going to help.