1HP Rotary Cooler

[Satyrs]

I heard about this beast cooler. It is very costly but the performance of the same is just awesome. I am looking for much more alternative for the same. I had found this cooler and just a bit of research told me that the it can bring down the temperature of processor in negative. But usually you cannot put such a big cooler on your system. What are the condition required for a better liquid cooling support.

[Brooks]

First of all in worst condition you might not get system boot after overclocking for that reset the settings by removing the battery flat. Open the PC, remove the battery and replace the same after two minutes. The PC will work and there will be minor bugs or issue. There are other different methods below to make your overclock stable. The cooling allows the CPU to have a greater chance of succeeding in the overclocking.

[Abbie]

There are lots of solutions here. The overheating problems have very large effects because they cause the blockage of the computer to see the destruction of the processor. To avoid this, you need a good ATX case with a good fan. I suggest you add one or two drops thermal paste between the CPU and fan. You can even add a heater, metal, with a particular shape that improves heat dissipation. The performance of the fan or cooling device depend on its size and its diameter.

[Common]

Do not forget to put thermal paste on your cpu. The area between the fan and the CPU is never a perfect flat. The thermal paste is a thermo-conductive fill the void and vacate the microscopic heat to the fan. A good solution is to buy fans for processors that heat better than yours, to do crafts and adapt the new fan for your processor. Do not forget to provide proper ventilation to your box.

[desilva]

You might have notice that the assembly of layers, hard drives and others create a barrier to ventilation. If you have space in your system then do not hesitate to install a second fan into the case more than one processor. It is expensive but really effective. This is a closed loop circulating fluid that cools the processor. This method prevents the processor to produce heat.

[Omari]

There are some different types of liquid cooling. Like Water cooling which is the most common one and easy to use. The other is Freon cooling, it is expensive and the elements used in this is methane or ethane. The cooling-based liquid nitrogen liquid nitrogen is very cold liquid. Installing a system like this is very complex and must be performed by a professional.

[JAMES_911]

You can run a cpu monitor on your system to keep a eye on the current temperature and the changes which will occur afterward. Have you heard about refrigerated cases. This solution is effective but the same is rarely used. There ear some software which allows you to lower the temperature of your processor. This software reduces the stress on the processor and thus less work led to less heat generated.