Overclocking software needed to test cpu

[Ceesar]

Hi,
Among the several software's there are some programs for overclockers, the software's will either display the temperature of your system or the frequency and current settings, or test the stability of the settings used, some other help test performance. Overclock a pc is not necessarily at the expense of stability, each component has its own potential for you to discover by using these little software that will shed light on the level of stability and allow you to quantify the impact your settings on the performance of your system. I need some best overclocking software's. Thanks in advance.

[Hockson]

You can use CPU Cpu Stress MT to keep a track of your cpu performance. After each setting change in Windows, launch Cpu Stress MT, if the test passes several minutes you can either continue to raise the frequency until you get an error and then back down for more optimism, or further certification stability for one hour and continue climbing for most patients.

[Viceman]

There are different software's as per the different needs for over clocking. Like for monitoring temperatures, voltages, display frequencies and timings the best is CPU-Z. It is a small software to check if the appropriate frequencies are applied, also displays the memory timings and SPD them. Get the latest version of the same.

[.:MUNDITO:.]

For getting the test and and fast benchmarks you can use SuperPi 1M. Benchmark fast that calculates the number Pi to 1 million decimal places. It quickly detects a problem instability of the memory or processor. The result it gives you the end is very insightful. This is because your CPU overclocked successful testing SuperPi 1M it is stable. Remember to close and reopen it, if an error occurs and you want to restart the bench.

[SUpER CoP]

SuperPi 32M the same program is used to calculate the number Pi to 32 million decimal places. This is a test much further requesting more memory and allows you to mount the CPU temperature by its length. If this test runs successfully, c is already a good indication of system stability. WPrime is also a tool which benchmark very recent, supports multi-core, two possible calculations: 32M and 1024M.

[JAMES_911]

If you would like to test the 3 Dmark2001. It is The ideal is to run the loop for long hours. To this one must be set in loop mode: in options click on "change" and check "looping" in the benchmark. It is a perfect test the stability of a system fully overclocked graphics card processor, from memory. If 3DMark 2001 goes, you can also try 3DMark03 and 3DMark05 loop also. If all these tests pass, you will be sure to have reached a stable overclock. But the combination SuperPI, Prime 95 and 3DMark 2001.