Msi p6n e6550 overclock

[advsnhal]

i have a msi p6n sli v2 motherboard with an e6550 processor.i want to overclock my configuration os can some one tell me how can i overclock this processor for good values and performance ?? also help me to overclock memory also. thank you .

[JAMES_911]

Msi p6n e6550 overclock is fine P5K-E e6550 overclock is good option If you are new you can try application utility to over clock like cpu-z and gpu-z also for grphics card rivatuner is best. RivaTuner is a complete powerful tweaking environment, providing you everything you may need to tune NVIDIA GPU based display adapters. The widest driver-level Direct3D / OpenGL and system tuning options, flexible profiling system allowing to make custom settings on per-application basis, both driver-level and low-level hardware access modes, unique diagnostic and realtime hardware monitoring features and exclusive power user oriented tools like built-in registry editor and patch script engine make RivaTuner's feature set absolutely unmatched

[Xan]

I have some question
how to watch Core temperature? and not exceed 60 ° C for cores .the minimum CPU vCore is 1.1v how? we can not get more? what that can be desynchoniser the ram down? ie on a 400 fsb and ram a 333 because the cpu core is running a 266 and a 333 ram also what we can do to increase the vCore with set fsb under windows and can we put the vCore in bios is 1.2v and under windows on a 1.1v

[.:MUNDITO:.]

It depends on the visible junction of core temp if tj = 100 does not exceed 85 °, 70-75 if you want to be more reasonable If tj = 85 ° does not exceed 65-70, the minimum CPU vCore depends on the motherboard but it is between 1 and 1.1v also you cannot increase the vCore with setfsb under windows

[Viceman]

you want to oc or underclocker car car 1.1v you can not halt voltage as it is usually 1.35 max original if you want to climb too high in time I will suggest you set as AC voltage and test frequency to the max 1.35 with vdrop more in the bios I have a friend who has mounted his 1.5V in bios to get a real 1.39 heating and therefore consumes a serious idle you to see vdrop is especially annoying on a quad

[Hockson]

Msi p6n e6550 overclock settingdisable Spread Spectrum settings arrange the PCIe at 100MHz, increase the CPU freq from 333MHz to 400MHz. That will put the CPU at 2.7GHz . The CPU DRAM freq ratio must be at 1:1 thats better as RAM overclocks along with the CPU. If RAM setting is at DDR2-800 (400MHz), then increased the CPU freq from 333 to 400MHz, you can further push it more to 3.0ghz but be careful ..