Fan control via software Freezer 7 Pro on AsRock Conroe945g-dviAC

[FredyB]

Sponsored Links

Hello guys, I have to ask help on a heatsink in question.
Yesterday I replaced the original Intel heatsink the Freezer 7, turn on the PC and SpeedFan and the temperatures are a marvel but the fan speed remains nailed between 1980 and 2015 rpm with the original, although the temperature of CPU to be higher, it also went down to 1200 rpm.

I have not changed anything on the bios and are currently not provided with regular x fanbus fans... how do I do?
Thanks in advance.

[lorenz]

Get into the bios and check that the setting of the cpu fan is on "silent".

[FredyB]

Already done. Unfortunately not on my set leaves a lot of things you just set (slow, mild, fast) and was always set to slow before the said stock now. Yesterday I was half an hour working with the pc without and see if the turbine is lowered and instead goes under Nos. 1980!

[lorenz]

Have you checked that the intel technologies for energy saving are enabled? If the set of cpu power, less heat and the fan down it in turns. However, the fan that has a range from about 850rpm to about 2700rpm... try once again to check all the settings right, sometimes a few escape!

[FredyB]

I checked the bios, but as I wrote first the only thing changed is a the option allows me to change the speed step there;

SpeedFan changes nothing, but I can not understand if me or interdict is a problem recognizes the mobo because in section.. my mobo is not in the list. boo..