Setting GPU Fan

[Milo.Pressure]

My CPU fan is such a part into pieces such that it makes noise when it comes under a certain speed.

It has annoyed me over the long and now I have to decide to force the fan to run at 80-100% constantly. I know that its life will be reduced, but am willing to sacrifice ...

I have seen little RivaTuner but has no encapsulates. A manual explain how I unlock the GPU fan to 80-100 percent would be fine. I read on, but it describes some features are not available in my RivaTuner.

[Omari]

Are you sure you have latest version of rivatuner?

In this case, when you open rivatuner press here



So would like to pop a box appearing with five icons, press the first named system settings.
So would like to doll up a new window



So just do as the sign then, that is only
1: Select "fan" up to the above.
2: Now select "direct control"
3: Set the slider to 90
4: Set checkbox in fan settings apply to windows startup
5: OK

So it should be happy to run with 90% all the time.
Have some of this functionality you have?

[Milo.Pressure]

It resets itself to 25% as soon as I hit "Apply"
I tried the version you suggest and report back. I did exactly what you describe.

[Omari]

As I could see in there you do not have the latest graphics driver? Just try to enter the nvidia page and download the very latest, and a newer rivatuner if you do not have the latest.

EDIT: Okay, you were fastest .. But I have so just found out I actually run with 2:11 rivatuner, you can try an older version and see if that is where the problem lies.

[Milo.Pressure]

Has updated GPU driver and running now with: GeForce ForceWare 180.60 XP (32 bit)

It works fine but my fan is still kicking up the stubborn beast. Inside are all RivaTuner Fan -> Driver-level fan control settings now to 100% across the board. It just does not try just Rivatuner 2.11

[Milo.Pressure]

CCleaner drove straight for the record. If there is something that conflicts, it is nice to have a grip on. Now RivaTuner 2.11 and now "Fan Tab" is away, install 2.20 again. It stipulates also that my GPU is not supported.

[lorenz]

Have you downloaded the 180.60 on nvidia's own website? as far as I know, it's still a beta version, said the latest stable version is 179.xx so it is quite clear I would recommend them. But it sounds good enough a mystery. If they are 100% but it is not running 100%, it must of course be the fan is broken?

[Milo.Pressure]

My logic tells me that the program does not take effect.
When I play demanding games, the heat runs up.