overclocking E6320

[Ganadeo]

Well hello all,

My configue:

• Processor: core 2 duo e6320
• Motherboard: Asus P5LD2-SE
• Ram: 2GB Kingstone pc5300
• Power: 550W power lc6550
• Graphics: 8600GT.

Here is my current frequency:

• AI overclocking Manuel
• CPU Frequency 302
• Frequency DRAM DDR-2 604Mhz
• PCI Express Frequency 101
• PCI clock synchronization mode 33.33MHz
• Memory Voltage 1.90V
• CPU Vcore Voltage 1.3375
• FSB Termination Voltage 1.30
• MCH self
• ICH self

Either 2.12Ghz all with heatpipe stock. My memory is barettes timer 4.4.4.12.4 . While this small world reached 61 ° full charge under occt 1h (auto) and perfectly stable. This extends say my goal is to reach 2.4Ghz (I look changed heatpipe) and my problem and the next. Having passed the 302fsb (thanks to an increase of 1 to PCI Express) I try the 307 valid exit .... The pc not boot, increasing the Vcore 1.35puis 1.37 then ... up to 1.45 without success. I note in passing that my ram was 614 (timer always 4.4.4.12.4 to 1.90v), also trying to launch a ram increase 2V.Niet. Apparently something escapes me as most post that I read, pase the 2.4Ghz stock (but with the 6400 pc often, this is the my problem?) Is it possible that my BIOS version 1003 to help my overclocking? jai view because of higher but is not understood how the flash.

I expect it will invest in a Zalman heatpipe coolemaster or if you tell me that my ram are not the problem why the Corsair PC6400 4.4.4.12 but n'investiré that if I reached a milestone of this past 2.4Ghz I count on you

[Owen]

Hi
Test your ram with memtest.
You have the PC5300 thus 333MHz x 2 = 666mhz
So the possibilities overclock a "normal" would be to put your fsb to 333.

Basically we can make a 7x333mhz = 2.33GHz which is not huge in light of opportunities (you will take some of PC6400) . the possibilities are either the practices you overclock (a shame), or you test your ability to ram O / C, you ram your desynchronizes . I do not know how the bios of your motherboard, and how she can edit.

Especially pay attention to T ° surface of your processor.

[Abhav]

You will need to test it with coretemp for the proper core temperatures and you need to keep them under 70 .
Download Core Temp 0.99.3