Results 1 to 6 of 6

Thread: DDR2-1066: OCZ or G.Skill

  1. #1
    Join Date
    Apr 2008
    Posts
    30

    DDR2-1066: OCZ or G.Skill

    Which of the two best of memories are best to overclock?

    OCZ 4GB (2 x 2GB) DDR2-1066 (PC2-8500) Dual Channel - OCZ2G10664GK



    Brand - OCZ
    Model - OCZ2G10664GK
    Type 240 - Pin DDR2 SDRAM
    Capacity - 4GB (2 x 2GB)
    Speed - DDR2 1066 (PC2 8500)
    Cas Latency - 5
    Timing - 5-6-6-18
    Recommend Use - High Performance or Gaming Memory


    G.SKILL 4GB (2 x 2GB) DDR2-1066 (PC2 8500) Dual Channel - F2-8500CL5D-4G***


    Brand - G.SKILL
    Model F2 - 8500CL5D-4G***
    Type - 240-Pin DDR2 SDRAM
    Capacity - 4GB (2 x 2GB)
    Speed - DDR2 1066 (PC2 8500)
    Cas Latency - 5
    Timing - 5-5-5-15
    Voltage - 2.1V
    Heat Spreader - Yes
    Recommend Use - High Performance or Gaming Memory


    With these memories, the fsb clock and the memories are not synchronized.

    With timmings and frequency: 4-4-4-12 @ 900.
    With it, the FSB clock and the memories will be synchronized.
    Which of the 2 are more interesting?
    I will acquired two kits, so they will be with 800, reaching 1066 or more through overclock.

  2. #2
    Join Date
    Dec 2007
    Posts
    1,736

    Re: DDR2-1066: OCZ or G.Skill

    I would of G. Skill 1066mhz PI or PI 900MHz, which are basically the same memory, only with different specifications. Both should be able to overclock ~ 1100MHz.

  3. #3
    Join Date
    Apr 2008
    Posts
    30

    Re: DDR2-1066: OCZ or G.Skill

    The G. Skill 1066 uses a PCB, 8 layers while the 900 uses 6. In any case, the motherboard (P5QC) with a QUAD does not allow me to go far beyond the 1100Mhz.

    That is quite limited OCZ, there's no 5% over 1066 in relation to that and also has the worst timming between the 2. Is this PI comes to 1100? It is more than 20% from over.

  4. #4
    Join Date
    Dec 2007
    Posts
    996

    Re: DDR2-1066: OCZ or G.Skill

    The best memories were already launched - DDR2 Crucial Ballistix 667. Reach higher than 1400MHz clock, ie exceed 100% Overclock. The rating of less memory is what counts.

  5. #5
    Join Date
    Apr 2008
    Posts
    30

    Re: DDR2-1066: OCZ or G.Skill

    I am grateful to have participation of you SUpER CoP by topic.

    I have the same PI BLACK 900.
    At that went searching, it goes to 960 MHz with timings and frequency, like 4-4-4-12. It will be in sync with the FSB, which should be around 470 ~ 480 at P5QC with a QUAD.

  6. #6
    Join Date
    May 2008
    Posts
    656

    Re: DDR2-1066: OCZ or G.Skill

    The series is OCZ for Over-the ReaperX. This is for there to compete with the Corsair in stock it. The ReaperX have lifetime warranty covering up to v2.3.

Similar Threads

  1. Replies: 2
    Last Post: 01-10-2011, 11:03 PM
  2. AM2+ CPU Limitation with DDR2 1066
    By K88 in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 09-07-2009, 12:50 PM
  3. 1066 Mhz DDR2 Running at 800 Mhz ?
    By Stefan09 in forum Motherboard Processor & RAM
    Replies: 2
    Last Post: 17-04-2009, 09:37 PM
  4. DDR2 800 vs DDR2 1066
    By K88 in forum Motherboard Processor & RAM
    Replies: 4
    Last Post: 20-03-2009, 03:29 PM
  5. DDR2 1066 @ 400 FSB slower than DDR2 800 @ 400 FSB
    By Walby in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 06-02-2009, 02:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,713,584,844.38902 seconds with 17 queries