Results 1 to 6 of 6

Thread: Cellshock 2x1GB DDR2-1066 CL5 - CS2221550

  1. #1
    Join Date
    Apr 2008
    Posts
    26

    Cellshock 2x1GB DDR2-1066 CL5 - CS2221550

    I have taken advantage of a good opportunity to replace my TeamGroup Elite 2x1GB DDR2-800 that as economic if they were quiet at 1000MHz with CL5 about 2.1V.

    Perhaps someone thinks that given the opportunity I would be able to move to 4GB, but not having special needs are left on a 2x1GB kit.
    The kit in question is as follows:
    - Cellshock
    - DDR2 1066
    - 5-5-5-15
    - 2GB (2x1GB)
    - 2.3V

    Here's a first test on the fly. I only set the four main timing and set the voltage to 2.3V as per specifications.

  2. #2
    Join Date
    May 2008
    Posts
    668

    Re: Cellshock 2x1GB DDR2-1066 CL5 - CS2221550

    I see stability for the first do some longer than 3min with the gigabyte ds4, you should have no trouble getting another process with the alpha timings.

  3. #3
    Join Date
    Apr 2008
    Posts
    26

    Re: Cellshock 2x1GB DDR2-1066 CL5 - CS2221550

    Obviously that was a screen test just started.
    Say that after 2h 22m can say that it is stable!

    With this result could prove a 400 * 8 cpu (with ram at 400 * 3). So as to increase the frequency. My e6420 has no problem to reach 3200MHz.

  4. #4
    Join Date
    May 2008
    Posts
    657

    Re: Cellshock 2x1GB DDR2-1066 CL5 - CS2221550

    Ram say that these are really good, because cmq 1200Mhz for all of DDR2 in my opinion.

  5. #5
    Join Date
    Dec 2007
    Posts
    996

    Re: Cellshock 2x1GB DDR2-1066 CL5 - CS2221550

    Even my non-D9 are 600 cas 5. You might try 1:2 and see what arrives CAS 5. Are you up to? You had crash etc. or can you still go up? The trfc is important, as we see a default set trial (row cycle time) if you are 5-5-5-15 should put it at 20 if I remember correctly.

  6. #6
    Join Date
    Apr 2008
    Posts
    26

    Re: Cellshock 2x1GB DDR2-1066 CL5 - CS2221550

    With the same settings placed above testing on 1248MHz.

    Then tried with RAM 1:2. Imposed the strap 1066? With a multiplier of 4.0 RAM can choose strap 800 or 1066.

Similar Threads

  1. FS: 2x1GB DDR2 667Mhz for Sell
    By Antani_90 in forum Buy Sell Computer Hardware
    Replies: 4
    Last Post: 08-04-2011, 09:13 PM
  2. AM2+ CPU Limitation with DDR2 1066
    By K88 in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 09-07-2009, 12:50 PM
  3. 1066 Mhz DDR2 Running at 800 Mhz ?
    By Stefan09 in forum Motherboard Processor & RAM
    Replies: 2
    Last Post: 17-04-2009, 09:37 PM
  4. DDR2 1066 @ 400 FSB slower than DDR2 800 @ 400 FSB
    By Walby in forum Motherboard Processor & RAM
    Replies: 3
    Last Post: 06-02-2009, 01:11 PM
  5. DDR2-1066: OCZ or G.Skill
    By sligh in forum Overclocking & Computer Modification
    Replies: 5
    Last Post: 12-12-2008, 04:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •