Cellshock 2x1GB DDR2-1066 CL5 - CS2221550

[The_D]

I have taken advantage of a good opportunity to replace my TeamGroup Elite 2x1GB DDR2-800 that as economic if they were quiet at 1000MHz with CL5 about 2.1V.

Perhaps someone thinks that given the opportunity I would be able to move to 4GB, but not having special needs are left on a 2x1GB kit.
The kit in question is as follows:
- Cellshock
- DDR2 1066
- 5-5-5-15
- 2GB (2x1GB)
- 2.3V

Here's a first test on the fly. I only set the four main timing and set the voltage to 2.3V as per specifications.

[Omari]

I see stability for the first do some longer than 3min with the gigabyte ds4, you should have no trouble getting another process with the alpha timings.

[The_D]

Obviously that was a screen test just started.
Say that after 2h 22m can say that it is stable!

With this result could prove a 400 * 8 cpu (with ram at 400 * 3). So as to increase the frequency. My e6420 has no problem to reach 3200MHz.

[lorenz]

Ram say that these are really good, because cmq 1200Mhz for all of DDR2 in my opinion.

[SUpER CoP]

Even my non-D9 are 600 cas 5. You might try 1:2 and see what arrives CAS 5. Are you up to? You had crash etc. or can you still go up? The trfc is important, as we see a default set trial (row cycle time) if you are 5-5-5-15 should put it at 20 if I remember correctly.

[The_D]

With the same settings placed above testing on 1248MHz.

Then tried with RAM 1:2. Imposed the strap 1066? With a multiplier of 4.0 RAM can choose strap 800 or 1066.