Results 1 to 6 of 6

Thread: Overclock Sempron 3000+

  1. #1
    Join Date
    May 2008
    Posts
    39

    Overclock Sempron 3000+

    Is there any one that overclocked Sempron 3000 ? I have Sempron 3000+, 1 GB DDR 400 and GF 8600 GTS by the processor in my opinion is not fully used, the motherboard is Gigabyte K8 Triton. I'm interested in how I would get to the performance in games when it is overclocked, and then I add graphic card.

  2. #2
    Join Date
    May 2008
    Posts
    666

    Re: Overclock Sempron 3000+

    3000+ kind? Socket 754?
    If this is, or later, than it has actually Athlon with less cache.

    Just you now writing (S754). My work at 2.03 GHz (neakvih 3300+ now). The original was on 1.8. Thus does the default voltage and have no heat. Go to 2.2. On the good side and by 2.3. More than that, do not expect.

    My thus set for approximately 20% faster more or less in all, from encoding MP3/DVD to play. Mostly, small difference. It is not heaven and earth, but a little.

    Also in 720p content I see no problem in it, with that load of processors approximately 60-70% during the movie. Resolution of 1680x1050.

  3. #3
    Join Date
    May 2008
    Posts
    39

    Re: Overclock Sempron 3000+

    That the socket 754, are the default overclocked with cooler, even these are not hard to give me more info procedure because overclocking just to be working correctly.

  4. #4
    Join Date
    May 2008
    Posts
    656

    Re: Overclock Sempron 3000+

    I suggest that if you do not know voltages then dont try hands on that. First read some of the basics. My recommendation is to search on web for some instructions.

  5. #5
    Join Date
    Dec 2007
    Posts
    996

    Re: Overclock Sempron 3000+

    With ordinary default cooler BOX, you should not be better. my processors temp forever around 33-34 degrees (idle) and 45-50 (100% loaded), from time to me, and the cooler box revolves primarily on 40%. More accurately to 1150rpm.

    Oh yes, between cooler and the processor is Arctic Silver past, now I do not know whether to play a major role. With the time that we no venilator housing, or not specifically winded.

    The process is simple:
    1. Set down memory divider, or reduce the memory to work at something lower rhythmic (eg, from DDR400 to DDR333) so that they would not pressure over DDR400 when clocking (because its timing increases) rear-frequency FSB and the bus

    2. do not touch-HTT frequency if you do not think to go over 230 MHz with FSB. If you go through, to lower the HTT to 3x with 4x cool'n'quiet-opt in order to avoid automatic voltage regulation \ clock, it does not want when overclocking.

    3. voltage processors to boot if you go to extreme heights, and if you stress that the system is unstable.

    It is difficult to explain in such a short text, but I tried to summarize.
    For more information, write to google: "Athlon 64 overclocking." Is the same thing.

  6. #6
    Join Date
    Dec 2007
    Posts
    1,736

    Re: Overclock Sempron 3000+

    I overclocked Sempron 2800+ 1.6 GHz, Registry asus k8u-x, manual on 2.2, the temperature in NAD .. 35-45 ... max 50 ... It is alive and well one week. Speed is really obvious ... with 1.6 to 2.2 ... I did not put additional stress nor overly boot voltage ... It is on 1.5.

    I think that you would with your own limits (somewhat strong from the mine specified) could also achieve good results.

Similar Threads

  1. Upgrading from AMD Sempron 3000+
    By Techzero in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 07-06-2010, 09:45 AM
  2. Cooling AMD Sempron 3000+
    By GameBond in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 07-06-2010, 09:38 AM
  3. Using AMD Sempron 3000+ Socket A 462 CPU with AsusTek
    By Asis in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 05-06-2010, 04:56 PM
  4. overclock amd sempron le-1200
    By trogen25 in forum Overclocking & Computer Modification
    Replies: 5
    Last Post: 12-08-2009, 07:26 PM
  5. Problems with overclock on Sempron 3000+
    By Zero_volt in forum Overclocking & Computer Modification
    Replies: 2
    Last Post: 07-03-2009, 06:53 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,710,836,859.87563 seconds with 16 queries