STOP ERROR: 0x00000ED (Windows XP) - please help

[catinrat]

Sponsored Links

I have a problem with a computer I use as a local server.

I get the following stop error message code (in blue screen mode):
_____________________________________________________________

UNMOUNTABLE_BOOT_VOLUME

STOP: 0x000000ED (0x89E3cc08,0xc000009c,0x00000000,0x00000000)
_____________________________________________________________

I can't find any threads with the same problem described.

How do I fix this bug?

Any help is greatfully appreciated.

/catinrat

[JAMES_911]

You can try to Repair the volume by following the below methods:

1. Start your computer by inserting the Windows startup disks or the Windows installation disk if your computer can start from the CD drive.
2. When the Welcome to Setup screen appears, press R to select the repair option.
3. If you have a dual-boot or multiple-boot computer, select the Windows installation that you want to access from the Recovery Console.
4. Type the administrator password when you are prompted to do this.
   • Note If no administrator password exists, press ENTER.
5. At the command prompt, on the drive where Windows is installed, type chkdsk /r, and then press ENTER.
6. At the command prompt, type exit, and then press ENTER to restart your computer.
7. After you repair the volume, check your hardware to isolate the cause of the file system damage.

[catinrat]

Thank you very much JAMES_11 !!!

It worked out perfectly and the computer is now running once again. Your help is appreciated a lot.

Prior to following your instructions i ran some self tests. The following error was displayed on the screen:

error code 0142
message error code : 2000-01420
message : harddrive 1- self test unsuccessful. Status : 72

Does anyone know if this is a serious problem and is the computer close to termination? Can I rely on it or should I replace it?

Once again thank you so much.

Best regards,
catinrat

[newtech]

The error code 2000-01420 that you were getting is related to a bad hard drive and you may want to replace the hardware or backup the drive as soon as you can, so that important data doesnt gets damaged. What is the hard drive make or model that you have and whats your computer specification anyways?

[catinrat]

It is a SAMSUNG HD161GJ.

Can I be sure that this is the drive that causes the error code?

Thanks for the fast reply.

Other computer specification:

Dell Optiplex 360
Pentium(R) Dual-core CPU
E5300 @2.60 GHz
2.59 GHz, 1,98 RAM

I know - old school stuff ;-)

[Kh@LnaYak]

Originally Posted by catinrat

It is a SAMSUNG HD161GJ.

Can I be sure that this is the drive that causes the error code?

Thanks for the fast reply.

Other computer specification:

Dell Optiplex 360
Pentium(R) Dual-core CPU
E5300 @2.60 GHz
2.59 GHz, 1,98 RAM

I know - old school stuff ;-)

As far as STOP ERROR: 0x00000ED (Windows XP) is concerned and if you are still getting the same error code then you can refer to the below article and try out the trouble shooting method that has been mentioned there and see if it is helping you out.
When you restart your computer or upgrade to Windows XP, you receive the "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME" error message

[catinrat]

Thanks!

What about the 2000-0142 error?

Should I replace the hard drive?

[catinrat]

Originally Posted by james_911

You can try to Repair the volume by following the below methods:

1. Start your computer by inserting the Windows startup disks or the Windows installation disk if your computer can start from the CD drive.
2. When the Welcome to Setup screen appears, press R to select the repair option.
3. If you have a dual-boot or multiple-boot computer, select the Windows installation that you want to access from the Recovery Console.
4. Type the administrator password when you are prompted to do this.
   • Note If no administrator password exists, press ENTER.
5. At the command prompt, on the drive where Windows is installed, type chkdsk /r, and then press ENTER.
6. At the command prompt, type exit, and then press ENTER to restart your computer.
7. After you repair the volume, check your hardware to isolate the cause of the file system damage.

Hi james_911,

Regarding the last bullet: do you have any suggestions as to how I should check the hardware to isolate the cause of the file system damage?

[Simond]

Originally Posted by catinrat

Hi james_911,

Regarding the last bullet: do you have any suggestions as to how I should check the hardware to isolate the cause of the file system damage?

Well, there is no way to repair a hard drive which is giving error code : 2000-01420, and its a sign that sooner or later the hard drive will be dead anyways. Incase if it is in warranty then you can all dell people and ask them for a replacement, if not then backup important data from the hard drive or else once the hard drive becomes un-usable, you will have to spend huge amount of money for recovering the data or so.