Hi,
I have a network with 1 Domain Controller (Windows 2008 Server) named FIP-RVE_70 and 10 clients with XP Professional.
I bought a new PC and I would like to put it in domain.
The PC has windows 7 professional.
I give the name FIP-RVE_12 and I configure the network of the client:
C:\>ipconfig /all
Configurazione IP di Windows
Nome host . . . . . . . . . . . . . . : FIP-RVE_12
Suffisso DNS primario . . . . . . . . :
Tipo nodo . . . . . . . . . . . . . . : Ibrido
Routing IP abilitato. . . . . . . . . : No
Proxy WINS abilitato . . . . . . . . : No
Scheda Ethernet Connessione alla rete locale (LAN):
Suffisso DNS specifico per connessione:
Descrizione . . . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Indirizzo fisico. . . . . . . . . . . : F0-4D-A2-EC-C0-65
DHCP abilitato. . . . . . . . . . . . : No
Configurazione automatica abilitata : Sì
Indirizzo IPv4. . . . . . . . . . . . : 192.168.1.21(Preferenziale)
Subnet mask . . . . . . . . . . . . . : 255.255.255.0
Gateway predefinito . . . . . . . . . : 192.168.1.253
Server DNS . . . . . . . . . . . . . : 192.168.1.200
NetBIOS su TCP/IP . . . . . . . . . . : Attivato
And nslookup give me this result:
C:\>nslookup
Server predefinito: fip-rve_70.fip-rve
Address: 192.168.1.200
> set q=srv
>_ldap._tcp.dc._msdcs.fip-rve
Server: fip-rve_70.fip-rve
Address: 192.168.1.200
_ldap._tcp.dc._msdcs.fip-rve SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = fip-rve_70.fip-rve
fip-rve_70.fip-rve internet address = 192.168.1.200
> exit
When I try to put it into the domain I have this error:
----------------------------------------------------------------------------------------------------------------------------
The domain name "FIP-RVE" might be a NetBIOS domain name. If this is the
case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then
the following information can you troubleshoot your DNS
configuration.
DNS was successfully queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain fip-rve:
The query was for the SRV record for _ldap._tcp.dc._msdcs.fip-rve
The following AD DCs were identified by the query:
fip-rve_70.fip-rve
Common causes of this error include:
- Host (A) records that map the name of the AD DCs to its IP addresses are missing or contain incorrect addresses.
- Active Directory Domain Controllers registered in DNS are not connected to the network or are not running.
-------------------------------------------------------------------------------------------------------
In the file c:\windows\debug\NetSetup I have a lot of:
07/01/2011 1129:062 NetpValidateName: checking to see if 'FIP-RVE' is valid as type 3 name
07/01/2011 1131:355 NetpCheckDomainNameIsValid for FIP-RVE returned 0x54b, last error is 0x0
07/01/2011 1131:355 NetpCheckDomainNameIsValid [ Exists ] for 'FIP-RVE' returned 0x54b
On the server side FIP-RVE_70 I have:
C:\Users\Administrator>ipconfig /all
Configurazione IP di Windows
Nome host . . . . . . . . . . . . . . : FIP-RVE_70
Suffisso DNS primario . . . . . . . . : FIP-RVE
Tipo nodo . . . . . . . . . . . . . . : Ibrido
Routing IP abilitato . . . . . . . . : Sì
Proxy WINS abilitato . . . . . . . . : No
Elenco di ricerca suffissi DNS. . . . : FIP-RVE
Scheda Ethernet Connessione alla rete locale (LAN):
Suffisso DNS specifico per connessione:
Descrizione . . . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (
NDIS VBD Client)
Indirizzo fisico. . . . . . . . . . . : 00-19-99-43-B1-3D
DHCP abilitato. . . . . . . . . . . . : No
Configurazione automatica abilitata : Sì
Indirizzo IPv4. . . . . . . . . . . . : 192.168.1.200(Preferenziale)
Subnet mask . . . . . . . . . . . . . : 255.255.255.0
Gateway predefinito . . . . . . . . . : 192.168.1.253
Server DNS . . . . . . . . . . . . . : 127.0.0.1
NetBIOS su TCP/IP . . . . . . . . . . : Attivato
Scheda Tunnel Connessione alla rete locale (LAN)*:
Stato supporto. . . . . . . . . . . . : Supporto disconnesso
Suffisso DNS specifico per connessione:
Descrizione . . . . . . . . . . . . . : isatap.{1C76327F-B17B-46D4-A605-F1C05
323390E}
Indirizzo fisico. . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP abilitato. . . . . . . . . . . . : No
Configurazione automatica abilitata : Sì
In the DNS I add the correct client host name in forward zone and also create the PDC (pointer) in reverse zone. I restart DNS and net logon.
I try also to run a dcdiag /fix (no significant errors on it) all steps passed.
I looking for netdiag /fix (but in windows 2008 doesn’t exist any more that command).
I have also WINS on the server configured in default way.
If you need more details ask to me.
Can someone help me?
Cheers
Sergio
Bookmarks