In Windows xp (KB975558) the security update fails to install.

[Mustaffa]

I am using the windows XP on mine new system. Everything on the system works perfectly and smoothly but 2 day before i had updated mine system and during this time I am not able to install the Security Update for Windows XP (KB975558). When I tried to install Security Update for Windows XP (KB975558) I got this error code: “0x8007F01E”. I have tried again to install it but at that time as well I got the same issue. I have also gone through some official website to solve mine issue but I didn’t have anything on this issue. So therefore can anyone suggest on this and so that I can solve mine issue.

[Felisha]

I would advise the following steps and so that you can solve your problem. To do this, follow these steps: make a stroke on the start icon on the desktop and then go to the run and run type cmd in the text box of the run and then click the OK button. During this time you have to type the UCA to confirmation. Now go to the command prompt and type the following and then press Enter.

regsvr32 /u softpub.dll
regsvr32 /u wintrust.dll
regsvr32 /u initpki.dll
regsvr32 /u dssenh.dll
regsvr32 /u rsaenh.dll
regsvr32 /u gpkcsp.dll
regsvr32 /u sccbase.dll
regsvr32 /u slbcsp.dll
regsvr32 /u mssip32.dll
regsvr32 /u cryptdlg.dll
exit

Now restart your system and then again open the command prompt and type the following command and then tap the enter on every command.

regsvr32 softpub.dll
regsvr32 wintrust.dll
regsvr32 initpki.dll
regsvr32 dssenh.dll
regsvr32 rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 mssip32.dll
regsvr32 cryptdlg.dll
exit

I hope this will help you lot to solve your issue.

[Devasis]

I would suggest the following, so you can solve your problem. To do this, you must follow these steps.

1. First make a stroke on the start icon and then go to the run and under that write services.msc and then press the OK button.
2. Now you will acquire the windows beneath that go to the service pane and then create right click on that and after that choose the stop.
3. Once the window now minimize service.
4. Now select everything in the Windows distribution folder and then delete it. (You will receive this folder on the disk: \ Windows \ Software Distribution in this location location of the driver here is the installation of Windows Vista) and after that make sure that you remove all files.
5. Now again maximize the service window and click on it and after you select the start and end the application to everyone in the system.
6. Once this is over now and then reboot your issue resolved. I hope this will help a lot.

[Solomon]

I have dealt with this topic and then my friend, I suggest the following steps and after that I am able to upgrade the mine system. To do so follow these steps:
Open a command prompt by going to Start and then click on the run and under that type CMD and then click the OK button. Now in the command prompt type the following and then click the enter after each command.

net stop bits
net stop wuauserv
Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat"
cd /d %windir%\system32
regsvr32.exe atl.dll
regsvr32.exe urlmon.dll
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe jscript.dll
regsvr32.exe vbscript.dll
regsvr32.exe scrrun.dll
regsvr32.exe msxml.dll
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
regsvr32.exe actxprxy.dll
regsvr32.exe softpub.dll
regsvr32.exe wintrust.dll
regsvr32.exe dssenh.dll
regsvr32.exe rsaenh.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe cryptdlg.dll
regsvr32.exe oleaut32.dll
regsvr32.exe ole32.dll
regsvr32.exe shell32.dll
regsvr32.exe initpki.dll
regsvr32.exe wuapi.dll
regsvr32.exe wuaueng.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wups.dll
regsvr32.exe wups2.dll
regsvr32.exe wuweb.dll
regsvr32.exe qmgr.dll
regsvr32.exe qmgrprxy.dll
regsvr32.exe wucltux.dll
regsvr32.exe muweb.dll
regsvr32.exe wuwebv.dll
netsh reset winsock
net start bits
net start wuauserv
bitsadmin.exe /reset /allusers

After the reboot now and then try to update the system.

[MrChris-]

I would like to advise you to follow the steps below and after that try to install your update: go to the start and then go to the run and on that type CMD and then hit the OK button. Now on the command prompt type the following and then hit the enter after each command.

attrib -s -h %windir%
attrib -s -h %windir%\system32
attrib -s -h %windir%\system32\catroot2
exit

I hope this will help you lot.

[Emiliio]

I would like to suggest you following steps and so that you can solve your issue. Go to the start an dthen make hit on the run and under the run type cmd and then hit the enter. Now under the command prompt type the following and then hit the enter:

net stop cryptsvc
ren %systemroot%\System32\Catroot2 oldcatroot2
net start cryptsvc
exit

Now delete the qall temp cat file on this folder.
%systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}