I have the Motherboard: Asus M2N-E SLI. After connecting the CPU fan runs, the computer will not boot and the fan does not rotate. After several tests, I found out that it is up to the connector on the board, which is responsible for the fan control. I plug the cable from the fan so the connection that it gets power, the fan only runs but the computer still does not run high, as in the bios no CPU fan is detected. Since I have no idea about soldering, I wanted to just turn off the bios fan control. This is unfortunately not because I'm not at all to the BIOS if there is no CPU fan is detected. Bios reset or so does not help there. Everything else about hardware I have tested and can rule out a defect. Does anyone have a tip for me? It would be much appreciable if you people provide the solutions with proper details.
Bookmarks