Results 1 to 5 of 5

Thread: Getting BSODs and driver not working

  1. #1
    Join Date
    Nov 2011
    Posts
    9

    Getting BSODs and driver not working

    Offently I am getting BSODs problem and driver problem both. I am very frustrated of these. It started when I used catalyst 11.7. After that updated it to 11.8 than too I am getting the same scenario. Also I want to tell you that I have overclocked my card from 850 to 1300 and 800 to 1250. I performed the test and found that I have lower fps. Then I followed msi afterburner but no help. What should I do?

  2. #2
    Join Date
    Nov 2010
    Posts
    363

    Re: Getting BSODs and driver not working

    BSODs and Driver Problems
    Attempt with IGP in the first place,
    • -Uproot the GPU,
    • -Restore bios to default settings,
    • -Boot with IGP, uproot ATI drivers
    • -Reboot,
    • -Introduce IGP drivers, Try any amusement with least setting for at some point.

  3. #3
    Join Date
    Mar 2011
    Posts
    490

    Re: Getting BSODs and driver not working

    The below issues might be the explanation behind the same:

    • -Failing overclock on CPU or GPU
    • -Bad segment in memory bringing about degenerate information being imparted amidst GPU and the framework (either motion picture or framework memory)
    • -Corrupt hard drive/windows fix bringing about adulteration to the framework registry or the page record
    • -Over warming of GPU or CPU again bringing about degenerate information being imparted.
    • -GPU washout receivable to any sort of issue from inadequate capacity to hotness.

  4. #4
    Join Date
    May 2011
    Posts
    398

    Re: Getting BSODs and driver not working

    In the event that reinstalling OS doesn't tackle the situation then I'm 99% certain it is Gfx card hardware issue, most in all probability defiled memory module.Futuremark is a grave piece of product to measure GPU's ability as it makes farfetched sort of workload over the GPU and anxiety it in the embodiment of a towering level which is almost implausible in any pure essence scenario.That's why every last trace of the survey posts in fact dropped futuremark tests to measure stack capacity consumption.

  5. #5
    Join Date
    Jul 2011
    Posts
    235

    Re: Getting BSODs and driver not working

    The very next important step after you acquire a video card, don't put much load on it by overclocking. In case if you overclock than utilize it as a stock 6950 is a truly a worthy powerful at stock & you don't need to overclock. When recreations begin ending up being large, then you would be able to overclock a touch. Be that as it may i think all unique event discharges for the present year will run faultlessly in a 6950 at full HD. So your gaming requires are totally wrapped.

Similar Threads

  1. Lenovo G770 ATI display driver is triggering BSODs
    By Run.DK in forum Portable Devices
    Replies: 5
    Last Post: 11-04-2012, 03:38 AM
  2. Various BSODs
    By midkemia in forum Windows x64 Edition
    Replies: 1
    Last Post: 26-01-2012, 10:55 AM
  3. Getting various BSODs with MSI 870 g45 motherboard
    By Abélard in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 09-06-2011, 11:04 PM
  4. Reoccurring BSODs and Crashes
    By wchang3 in forum Vista Help
    Replies: 1
    Last Post: 21-05-2011, 07:52 AM
  5. Windows 7 x64 gives 9 BSODs in 3 hours
    By Chestery in forum Operating Systems
    Replies: 4
    Last Post: 05-04-2010, 05:11 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,714,001,181.12902 seconds with 17 queries