Windows 7, Matrix Storage and RAID1 - verification errors

[Samara]

I am configuring on windows 7 on my Intel machine. I am installing the windows 7 seven on RAID 1. But i found that the computer has rebooted from a bugcheck . The bugcheck was: 0x100000d1 ( 0x0000000c , 0x00000002 , 0x00000000 , 0xaa6a6f21 ) . Please resolve the issue. Thanks in advance.

[Dr. V]

You can solve some problems by checking the computer errors that occur on a drive or drives . For example, you can check the primary hard drive of your computer to troubleshoot performance problems . You can also conduct checks if an external hard drive does not work correctly.
1. Open Computer , click the button , Then Computer.
2. Click the right mouse button on the drive to check , and then click Properties.
3. Click on the tab Tools Then , under Error Checking, Click Check Now. You are prompted for an administrator password or confirmation , provide the password or confirmation.

[SalVatore]

To automatically fix errors related to files and folders detected by the verification procedure, select the checkbox Automatically fix file system error. If you do not select this option , the process of checking the disk makes a report without correcting the problems. To perform a complete audit of the disc , check Look for and attempt recovery of bad sectors. This analysis finds and corrects errors on the physical disk drive , which may take some time. To find both errors in the file system and physical errors , select the check boxes Automatically fix file system error and Look for and attempt recovery of bad sectors.

[jesse]

I think the RAID 0 is not a good solution for you because of two things:
* The drive capacities are not identical therefore loss of space
* The speed ( SATA and SATA 2) are different, therefore, loss of performance
The best is to format your second drive and attach it in one of your directories . This is what is called a " mount point ". Mount points can add access to a disk from a directory on this disc. Clearly , the original drive C : to a directory C : Documents Empty. We can using a mount point to attach the new disk in C : Documents . This means that all that is written in C: Documents will be written in the second disk and not on C.

[Lillebror]

You need to creating a mount point.
1 . Identify the empty folder to a partition or an NTFS volume for your mount point.
2 . Click the right mouse button on the partition or volume to mount, then click Change drive letter and paths .
3. Click Add .
4. Click Mount in the following empty NTFS folder .
5 . Type the path to an empty folder on an NTFS volume , or click Browse to locate it . After entering the path
appropriate, click OK .

To perform this procedure , you must be logged in as Administrator or member of the Administrators .

[Quentin]

Yo manually test your hard disk, Windows XP has a tool for error checking . We recommend you run it once a week.
1.To do this, open the Work stationThen click with right mouse button on the drive to analyze . Click Order Properties.
2.Open tab Tools.
3.In section Error Checking, Then click on the button Check Now.
In the window Check Disk you have the choice between two scanning options :
4. Automatically fix file system errors
This mode searches for missing clusters , the Crusaders files and files or folders invalid . If the scan detects problems, they are automatically repaired . This check takes a few minutes .
5. Look for and attempt recovery of bad sectors. This mode carefully analyze your hard drive looking for bad sectors. If the scan finds a bad sector, it tries to move the data contained in this sector to a healthy sector . This may take several hours.

[MaggieK]

If you have an option and that vary the pc does not start more properly , the start and press the button insert . if that does anything change , open the box and remove the battery plate few moments . replace the two minutes after , the time to possible capacitors to discharge of any electricity . then restart your pc. the bios is reset. Meaning of bios beeps at startup.