Windows7 does not recognize the ADSL PPPOE broadband

[Efigenio]

Hi all,

Windows7 system just installed today, feeling good, comfortable frame comparison. But I do not know whether the problem encountered, the system which I use ADSL PPPOE Windows7 broadband dial-up when the network logo icon in lower right corner of the screen appeared abnormal, with a small circle where the working class in turn do not know on. The endless, so when the transfer completed, the mouse into the above, the broadband connection, even display "Internet Access" - "Local Area Connection shows no recognition"!. I want to know that how to solve Windows7 system does not recognize the local dial-up ADSL connection approach. Please suggest.

[Dr. V]

You need to right-click the taskbar notification area Windows7 (tray) of the Network icon to open the "Network and Sharing Center". Open Network and Sharing Center which form the left, click the "Change Adapter Set". Check the procedure and reply.

[SalVatore]

The emergence of this error, usually due to a connecting link for the following reasons disconnect:
1. The line is a problem.
2. Noise lines
3. Broken by the system administrator
4. The speed can not be selected with the remote access server modem.
Check and reply.

[jesse]

If you redial the error persists, please reduce the speed of the modem connection, and then try to redial. Try to connect to other servers to determine whether this problem is to call the remote access server-specific. Similarly, it can try another phone line to connect to the original server. All the best.

[Lillebror]

check the following steps:
(1). Right-clickWindows7Taskbar notification area (tray) of the Network icon to open the "Network and Sharing Center"
(2). In the open Network and Sharing Center which form the left, click the "Change Adapter Set"
(3). In the "local connection" click the right mouse button above, click on Properties", remove internetProtocol Version4 TCP/IPv4 The check
(4). Re-connect . All the best.

[Calvin K]

Check the following steps to connect proper ADSL PPPOE broadband.
(1) The interface must be a character, type adsl-setup, and then type the following content as required.
(2) Enter your PPPoE user name: enter your broadband account username.
(3) Enter the Ethernet interface connected to the ADSL modem
(4) Enter the demand value (default no): type "no"
(5) Enter the DNS information here: enter the DNS server address, which means that broadband service providers will automatically provide you the DNS server IP address.
(6) Please enter your PPPoE passWord: Enter the broadband account password.
(7) Please confirm your pppoe password: Re-enter just broadband account password.
(8) Choose a type of firewall (0-2): enter 0, do not useFirewall。
(9) Accept these settings and adjust configuration files (y / n)? If you enter the correct information, enter y, the completion of configuration, or enter n to re-set.