How to Use Bios Dumper v2.0 - Iso

[Aasha]

Hello , I need to Use the Bios Dumper Iso Software , can you tell me How Can I Use the Bios Dumper software , please help me Thanks in advance

[MrChris-]

Hello , maybe I think you need to download the bios dumper BIOS Dumper v2.0 - ISO This is a tool for dumping information from Playstation2, including bios, dvdplayer rom, non-volatile memory, etc.This is the ISO version of the BIOS Dumper (all files are on a pre-made ISO).


Download From here

[Solomon]

0. Command line params:
-noinf -norom0 -nofrom -norom1 -nodiff -norom2 -nonvm
each param is optional and if present makes the tool to skip the creation of the corresponding file. default is to create all files


-forceusb
also optional, the tool tries to detect if a 'host' device is available. If specified, the tool will dump to an USB mass drive (ie. USB pendrive, USB stick, camera or mobile phone in USB storage mode)


1. Connect to your PS2 using Naplink, Ps2link or whatever method you like. The tool was tested to work over USB, Eth and Fw. It's best to use the latest Naplink (1.1.0) or the latest PS2link (1.46 or up). With some console models and older Naplink or Ps2link the program might crash. You can still get a full set of files by using command-line params, to dump missing files. Make sure you have enough space on destination drive (host or usb-mass), you'll need about 18 megs free.


2. Run ps2dumper.elf (with parameters if needed). Wait till it displays on the screen -= DONE =- message. If it hungs see the note (a.) on Modchips and try again, using -noxxxx command-line parameters to skip already dumped files.


3. When you got all the files (see note b.) make sure that 7z.exe is in the same directory as the bat file and run the last one. The dumped files should be replaced by a p2b file.


4. Look on the back of the console on Sony product label and get the Serial Number (under the voltage specification). Rename the file to include the serial number. Example: if you have Serial Number FB0123456 and (fresh file) SCPH-39003_UK_Con_0160_20020319_v7.P2b rename it to (renamed file) SCPH-39003_UK_Con_0160_20020319_v7_FB0123456.P2b


5. You will be able to use it with the next version of PCSX2 (v0.94 or up)