Results 1 to 4 of 4

Thread: Linux - I do not see X Sensors

  1. #1
    Join Date
    May 2008
    Posts
    531

    Linux - I do not see X Sensors

    Hello,

    I installed Xsensor. It is in the menu system.
    When I click, I see nothing.

    In a terminal, I type sensors, it shows the following:
    blindsleeper @ blindsleeper -desktop: ~ $ sensors
    as99127f-i2c-0-2d
    Adapter: SMBus Via Pro adapter at e800
    VCore 1: +1.78 V (min = +1.54 V, max = +1.95 V)
    VCore 2: +2.59 V (min = +1.54 V, max = +1.95 V)
    +3.3 V: +3.50 V (min = +2.96 V, max = +3.63 V)
    +5 V: +5.03 V (min = +4.49 V, max = +5.51 V)
    +12 V: +11.86 V (min = +9.55 V, max = +14.41 V)
    -12V: -2.48 V (min = -0.32 V, max = -4.07 V)
    -5V: -1.13 V (min = -0.82 V, max = -1.76 V)
    FAN1: 4090 RPM (min = -1 RPM, div = 2)
    Fan2: 0 RPM (min = 84375 RPM, div = 2)
    fan3: 0 RPM (min = -1 RPM, div = 2)
    M / B Temp: +30.0 ° C (high = +0.0 ° C, Hyst = +64.0 ° C) ALARM
    CPU Temp: +29.0 ° C (high = +90.0 ° C, Hyst = +80.0 ° C)
    temp3: -0.5 ° C (high = +122.0 ° C, Hyst = +121.0 ° C)
    cpu0_vid: 1750 V
    beep_enable: enabled

    So why nothing happens when I click on X Sensor in the menu system?

    Have you any idea.

  2. #2
    Join Date
    May 2008
    Posts
    297

    Re: Linux - I do not see X Sensors

    Hello: we must launch a program to display (sensors), style "system monitor" (I add Ubuntu in one application)

  3. #3
    Join Date
    May 2008
    Posts
    531

    Re: Linux - I do not see X Sensors

    Hi SimonBoss,

    What software do I install?

    Under add / remove, I see only Xsensor.

    in synaptic ago lm-sensors and, as I believe in (not) sensor-applets

    What should I install?

    I want the temp of the CM, CPU, etc ..., the speed of fans ...

    I am very new to the software installation

    Thank you

  4. #4
    Join Date
    Mar 2008
    Posts
    672

    Re: Linux - I do not see X Sensors

    Then, you make a right click on the dashboard (the gray bar from the top or bottom), you click on "add to the scoreboard, where you choose monitor equipment.

Similar Threads

  1. Thermal Controller Sensors get locked
    By Rae in forum Motherboard Processor & RAM
    Replies: 6
    Last Post: 01-07-2011, 09:44 PM
  2. MSI 790FX-GD70 motherboard has bad temperature sensors
    By The$Tourist in forum Motherboard Processor & RAM
    Replies: 5
    Last Post: 17-03-2011, 10:26 AM
  3. E75 Sensors disabled by firmware
    By Asclepius in forum Portable Devices
    Replies: 5
    Last Post: 22-04-2010, 04:06 AM
  4. How to add Sensors to Windows7
    By LaTrell in forum Operating Systems
    Replies: 4
    Last Post: 30-03-2010, 10:38 AM
  5. Cleaning digital camera sensors
    By Macfly in forum Portable Devices
    Replies: 3
    Last Post: 05-06-2009, 10:44 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,631,764.09854 seconds with 17 queries