Results 1 to 3 of 3

Thread: No Ports in Device Manager with Error 633

  1. #1
    Join Date
    Dec 2007
    Posts
    79

    No Ports in Device Manager with Error 633

    Hello.

    My problem is with connecting VMClite, its is impossible. I get the error code 633 (ERROR_PORT_NOT_AVAILABLE).

    Also impossible since the Vodafone Mobile Connect Lite with the following message: "Connection Error. A connection to the remote computer could be established. The port will be closed "?

    The signal is correct in 2G and 3G
    I tried on an HP desktop and a laptop ASUS last generation.
    Negative results?


    Thank you.

  2. #2
    Join Date
    May 2008
    Posts
    209

    Re: No Ports in Device Manager with Error 633

    Even if its disable, terminate programs that are on the connection may access (eg fax) proposes fails, you can try reinstalling your modem with the latest drivers.

  3. #3
    Join Date
    May 2008
    Posts
    308

    Re: No Ports in Device Manager with Error 633

    Solution for Error 678 :

    Step 1. Check if your link to the network (if the lights beculetul to your network where the cable enters UTP).
    If not call your ISP
    If YES go to step 2

    Step 2. Check in connection properties if you are writing to the Service Name.
    There must be nothing there. If you have, remove.

    Step 3.
    Check if the status window "Local Area Connection" in the menu are the following Support:
    In Address type: assigned by DHCP and it takes like ip 10.40. ? simply restored the connection (or is the firewall)
    - The address type: automatic ip address / invalid IP address is usually a problem from the client settings (to verify protocol TCP / IP / firewall / reinstalled the network card)
    If after checking all the functions still do not call to your ISP (your provider)
    Step 4: For Win 98? the Network / TCP / Properties check:
    - Ip is set to automatically
    - Has anything changed to the DNS and Gateway
    - To be checked WINS Configuration option: "Use DHCP for WINS Resolution"
    - If the above are fulfilled check what address they take your order through the network: Start => Run => Command => ipconfig / all
    - If you take 10.40.xx ip check your firewall or antivirus to any connection.

Similar Threads

  1. Please Help! USB ports/hubs deleted from Device Manager
    By Becs in forum Hardware Peripherals
    Replies: 2
    Last Post: 04-07-2010, 06:28 AM
  2. Replies: 3
    Last Post: 18-03-2010, 11:04 AM
  3. No Ports is shown in Device Manager
    By Asaph in forum Networking & Security
    Replies: 4
    Last Post: 11-07-2009, 01:34 PM
  4. ACPI error and "unkown device" in Device Manager
    By HAYES in forum Vista Hardware Devices
    Replies: 2
    Last Post: 05-02-2008, 12:33 AM
  5. Com ports not visible in device manager
    By auditswithfire@yahoo.com in forum Vista Help
    Replies: 2
    Last Post: 09-01-2008, 09:58 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,713,883,364.47715 seconds with 17 queries