VLan 60 loosing connection after 4 hours

[Power Crippler]

Sponsored Links

Hello guys, I am using the VLan 1, 60 for my network. I am not able to understand that why is this thing happing to me. When I am using the router it works fine, as the time passes on it gets disconnected with all the devices connected to it. It automatically gets disconnected after 4-5 hours of continuous connection. Can anyone provide me the solution?

[chuck28]

I also have the XPS 435MT with me and even I want to upgrade my XPS 435MT. I wanted to install the SATA 3 SSD in my XPS 435MT but I was unable to install. I searched for the compactable PCI card but I didn’t got any. I was searching it about 3-4 months ago. But you can upgrade your Dell studio XPS 435MT now to support the SATA 3. I know that XPS 435MT does not support the SATA 3. The interface of the XPS 435MT is limited to 3GB/s by the hardware, but it will take the higher speed drive in it. You can use the StarTech 2 Port SATA 3 PCI Express Controller Card to support the SATA 3 in you XPS 435MT. You can use this external PCI slot card to connect your SSD at SATA 3.

[Bhuvana21]

I was having the same problem and I changed some of the settings and my router worked perfectly after changing the settings. Try to change the following things in the router and check whether it is working or not.
1. Using switch port mode general.
2. Using switch port mode trunk
3. Enabled IP routing (this sort of worked).
4. Replace the 6248 at a site and use the old cisco.

[Bhuvana21]

Hi there I had the same problem in my router and was unable to get connected with it for more than one hour. I was frustrated with this problem. I searched on many websites but didn’t got the solution. I told my about the problem he is a network administrator he suggested to change some settings and I did it and I am able to access and even I am connected with the router as long as I want. Here are the following things that I changed.
• Interface Ethernet 1/g1
• Negotiation 10h 10f 100h 100f 1000f
• description InPath-Riverbed
• Spanning-tree disable
• Switchport mode general
• Switchport general allowed vlan add 60 tagged
• Interface Ethernet 1/g47
• Description 'Uplink2PBX'
• Switchport mode general
• Switchport general allowed vlan add 1,60 tagged