Vlan configuration on Hp A5800

[sILK Smitha]

Sponsored Links

I am new to HP networking. I had commencing from a primarily Cisco background and I am endeavoring to set of connections to my business's server core. I am in the premature phases of acclaimating myself through the HP 5800. I have a number of pretty simple milestones I have position for myself to acquire familiar with the 5800 and its command system. Need some help for Vlan configuration on Hp A5800.

[Zared]

I am recently working through an HP A5800-48G. I might approximate to position ports 1 through 5 to an ipv4 configured vlan 10. VLAN 10 determines to have encompassed the subnet 10.0.10.0/24 mask 255.255.255.0. The switch itself determines to be part of this VLAN as well through a management ip address of 10.0.10.1 ideally I might like to setup SSH as well. Ultimately I would approximate to configure these ports in a trunk configuration to hook up to a number of ESXi servers that determine to utilize the VLANs maintained by the HP 5800.

[Jugo]

Just you desired to touch base through this issue. I figured out what I was doing wrong. I in conclusion was capable to acquire into the WebUI merely by fumbling approximately in the console CLI. On one occasion I had acquire into the WebUI I was capable to play around through the permitable options. I have encompassed and attached the settings I believe I necessitate to configure and to have right of entry port on interface gi1/0/1 and a trunk port through specific vlans setup on gi 1/0/2 the entire in excess of again, this is just for anybody that cares.

[Captain Samuel Salt]

So basically what occurred was I one way or another was capable to stumble through the Fundamentals direct to turn on the http service. Commencing from there I configured the VLAN settings beneath the Network context menu on the left. I had recently configured VLAN and VLAN interfaces.

[Bhuvana21]

On one occasion I configured that information in sequence as needed, I did a display current commencing from system-view and saw my output. This creates a bit additional sense to me at present. I am having a number of issues setting up HTTPS and SSH though. If anybody has a superior tutorial then the one scheduled in the Fundamentals Guide, I might appreciate the link.

[Reese-R]

I am recently connected to the switch commencing from side to side to an SSH session through that to facilitate port. Please reference the setup demonstrated by most of the users. That is actually me beneath an older account registered through a different company. Your config is extremely well they must have referred the innovative config for which you had the vlan tagged on the hybrid type interface.

[Eeshwari3]

A VLAN is an assembly of ports nominated by the switch as belonging to the similar broadcast domain. With the intention of is, the entire ports carrying traffic for a particular subnet address might belong to the similar VLAN. Utilizing a VLAN, you be able to group users by logical function as an alternative of physical location. This assists to control bandwidth usage by permitting you to group high-bandwidth users on low-traffic segments and to organize users commencing from different LAN segments according to their necessitate for common resources.

[TABLITA]

Beginning through the release of C.06.01 of the switch software operating system, or OS you be able to utilize the switch's console interface to position together up to 30 port-based, IEEE 802.1Q-compliant VLANs. Earlier releases of the OS permit up to eight port-pedestal, IEEE 802.1Q-compliant VLANs. This facilitates you to utilize the similar port for two or additional VLANs and tranquil permits interoperation through older switches with the intention of require a separate port for each VLAN.