here are some configuration if this helps you anyhow.
Steps in Catalyst Switch 3560:
Code:
Switch # config t
Switch (config) # vlan 10
Switch (config) # vlan 20
Switch (config) # interface e0 / 1
Switch (config-fi) # vlan-membership static 10
Switch (config-if) # interface e0 / 2
Switch (config-if) # vlan-membership static 10
Switch (config-if) # interface e0 / 4
Switch (config-if) # vlan-membership static 20
Switch (config-if) # interface e0 / 5
Switch (config-if) # vlan-membership static 20
Switch (config-if) # interface fastethernet0/26
Switch (config-if) # Trunk On
Switch (config-if) # exit
Switch (config) # ip default gateway 10.0.0.3
Switch (config) # ip add 10.0.0.5 255.255.0.0
The steps in ICT Router:
Code:
ICT-Router (config) # interface f0 / 0
ICT-Router (config-if) # description Connected to a Switch
ICT-Router (config-if) # exit
ICT-Router (config) # interface f0/0.1
ICT-Router (config-subif) # ip address 10.0.0.3 255.255.0.0
ICT-Router (config-subif) # encapsulation ISL 1
ICT-Router (config-subif) # exit
ICT-Router (config) # interface fastethernet0/0.10
ICT-Router (config-subif) # encapsulation ISL 10
ICT-Router (config-subif) # ip address 10.22.47.140 255.255.0.0
ICT-Router (config-subif) # exit
ICT-Router (config) # interface fastethernet0/0.20
ICT-Router (config-subif) # encapsulation ISL 20
ICT-Router (config-subif) # ip address 192.168.0.3 255.255.0.0
Bookmarks