Go Back   TechArena Community > Technology > Networking & Security
Become a Member!
Forgot your username/password?
Tags Active Topics RSS Search Mark Forums Read SiteMap

Tags: , , , , , ,

Sponsored Links


How to configure Netgear WNCE2001 & Samsung PN58C8000

Networking & Security


Reply
 
Thread Tools Search this Thread
  #1  
Old 22-10-2011
Member
 
Join Date: Sep 2011
Posts: 59
How to configure Netgear WNCE2001 & Samsung PN58C8000

Sponsored Links
I necessitate help for configuring the Wifi Adapter to my innovative internet ready Samsung TV. I execute the WPS setup commencing from side to side a netgear WNCE2001 and WNDR37AV and the entire is connected without several tribulations. Additional than when I do a network test on the Samsung TV I acquire Gateway ping failed message and not capable to reach the internet. I have encompassed and setup the network in dynamic and static and acquire the similar message. When I set the gateway to the ip of the WIFI Adapter it resolution the Gateway ping other than still not be able to connect to the internet. I have position the Wifi Adapter and the TV ip in the DMZ host mode. I am a bit confused right at present any other suggestions.

Reply With Quote
  #2  
Old 22-10-2011
Member
 
Join Date: Jun 2011
Posts: 403
Re: How to configure Netgear WNCE2001 & Samsung PN58C8000

The Router a netgear WNDR37AV I have right of entry it through IP 192.168.1.1 other than my cable modem and Motorola SBG900 DCHP allocate it 192.168.0.16 Have you endeavor attaching the adapter to a computer to observe if it runs. If it does, then it’s incredible in the TV causing the issue and I might call Samsung to observe what adapters the TV sustains or maintains or there might be a list in the manual. If it does not, then it’s the majority probable the adapter in view of the fact that it does not work and I would take it back to acquire it replaced or a dissimilar model.
Reply With Quote
  #3  
Old 23-10-2011
Member
 
Join Date: Jul 2011
Posts: 314
Re: How to configure Netgear WNCE2001 & Samsung PN58C8000

It in addition sounds similar to that if the modem not be able to be set to modem merely mode, with the intention of there is going to be a double NAT issue as well. I put out of action the NAT in the SBG900 publishing the ISP address the WNDR37AV and at present is the merely DHCP server on the network. Reset the whole thing back to dynamic and still not be able to resolve the gateway ping.
Reply With Quote
  #4  
Old 23-10-2011
Member
 
Join Date: Jul 2011
Posts: 271
Re: How to configure Netgear WNCE2001 & Samsung PN58C8000

The adapter works extremely well on my directv sat box. I do not be familiar with what the samsung tv is giving the impression of being for. I had called samsung tech hold up and said I moreover have to purchase their wifi USB box or hard wire it.
Reply With Quote
  #5  
Old 23-10-2011
Member
 
Join Date: Jul 2011
Posts: 322
Re: How to configure Netgear WNCE2001 & Samsung PN58C8000

When you setup as dhcp on Samsung do you acquire the entire the IP commencing from the router. In addition have you test commencing from side to side Samsung wired the router. This might be hard to do other than you desire to test this I agree through June. It is extremely recommended to test the TV hard wired to create certain to facilitate the device itself be able to allocate an IP address and connecting parameters appropriately. In view of the fact that you have encompassed and tested the adapter on another device and it functions appropriately is that correct, then you have to presuppose it is an issue by means of the TV, or the entire in excess off again as I said before, an issue through the wireless adapter and the TV.
Reply With Quote
  #6  
Old 23-10-2011
Member
 
Join Date: Aug 2011
Posts: 203
Re: How to configure Netgear WNCE2001 & Samsung PN58C8000

In view of the fact that Samsung says you moreover have encompassed to purchase their proprietary WIFI box or hardware it, it sounds similar to they did not add hold up for additional vendor's NETGEAR, LinkSys, etc WIFI adapters. If you hard wire your TV and it functions appropriately, then with the intention of would be a superior indication of that.
Reply With Quote
  #7  
Old 23-10-2011
Member
 
Join Date: Aug 2011
Posts: 348
Re: How to configure Netgear WNCE2001 & Samsung PN58C8000

The WNCE2001 is working and I be able to attach a system to the internet through it. The TV determine to connect to the internet completely if I run a long cable unswervingly commencing from it to the router other than working with a wire permanently is not an alternative consequently the Netgear equipment. When I attach the WNCE2001 to the TV and endeavor to connect utilizing auto setup on the TV I be able to evidently pull the IP information in sequence and DNS other than it fails at the gateway ping. If I enter the information in sequence manually I acquire the similar thing. I have encompassed and tried through no security, WPA and WPA + WPA2.
Reply With Quote
  #8  
Old 23-10-2011
Member
 
Join Date: Jul 2011
Posts: 286
Re: How to configure Netgear WNCE2001 & Samsung PN58C8000

The Samsung TV fails at the Gateway Ping test each time, additional than I be able to ping the TVs IP address commencing from my computer and the TV be able to observe my computer as a media streaming apparatus on the TVs source menu. On the other hand the WNCE2001 runs through my desktop computer and my laptop on the Internet extremely well. The TV works when connected unswervingly by cat5 cable. It seems similar to the Netgear apparatus has a predicament with the Samsung TV.
Reply With Quote
  #9  
Old 23-10-2011
Member
 
Join Date: Feb 2011
Posts: 111
Re: How to configure Netgear WNCE2001 & Samsung PN58C8000

Any ideas, It seems similar to a firmware issue perhaps, It seems similar to the universal adapter is not universal after the entire. Several dissimilarity between firmware .25NA and .25testNA beta or is the beta test complete and this the similar update just presently the file names are different.
Reply With Quote
Reply

  TechArena Community > Technology > Networking & Security


Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "How to configure Netgear WNCE2001 & Samsung PN58C8000"
Thread Thread Starter Forum Replies Last Post
How to fix Gateway Ping Failure of Samsung UN40C6500 with Netgear WNCE2001 Bozidar Networking & Security 8 06-11-2011 02:22 AM
How to configure Netgear WNCE2001 with GUI of connected device jamiejohn Networking & Security 7 24-10-2011 10:39 PM
How to Connect Netgear WNCE2001 with samsung LCD AliaShaikh Networking & Security 4 22-10-2011 11:09 AM
Configure static IP address for connecting Netgear WNCE2001 Dvimida Networking & Security 3 19-10-2011 10:57 PM
Unable to configure netgear WNCE2001 router Ishwari Networking & Security 4 21-09-2011 07:55 AM


All times are GMT +5.5. The time now is 07:36 AM.