Go Back   TechArena Community > Technology > Networking & Security
Become a Member!
Forgot your username/password?
Tags Active Topics RSS Search Mark Forums Read

Reply
 
Thread Tools Search this Thread
  #1  
Old 28-07-2011
Member
 
Join Date: May 2011
Posts: 58
Unable to boot Econel 100

Trusting someone can serve a useful purpose? I've got an Econel 100 that close itself down and now won't capacity once again down. I've evacuated all extension cards and displace the capacity supply. The case and CPU fans rotate up quickly when the capacity link is connected and the golden light on the front of the case goes ahead, but when that nothing. Any plans that how to boot Econel 100? If you don't mind assist me in taking care of the situation.
Reply With Quote
  #2  
Old 28-07-2011
Member
 
Join Date: Jun 2009
Posts: 1,205
Re: Unable to boot Econel 100

See if your fans and drives are turning up speedy enough, maybe visualization a natural drive assuming that you could probably the time is now, to resolve BIOS state issues from befuddling the DDR. What numbers of DIMMs are in there now? A fast upgrade, I was ready to commission XP on the machine by setting the SATA mode from either attack of back to local. That works 100%.
Reply With Quote
  #3  
Old 28-07-2011
Member
 
Join Date: Mar 2009
Posts: 1,221
Re: Unable to boot Econel 100

I imagine that you ought to arrange the SATA head on a different PC it still cannot see it on the XP introduction. In the event that I put a pre instituted XP circle in the Econel see the drive and collisions on boot up (this I could anticipate). However how is it seeing the drive? Or in this case I imagine that everything you need to do is go into the bios and set the SATA mode from attack to local, then at what point I instituted XP it did not request from me a f6 driver to see the attack side of it, if that tries not to help possibly you require a bios upgrade?
Reply With Quote
  #4  
Old 28-07-2011
Member
 
Join Date: May 2008
Posts: 1,304
Re: Unable to boot Econel 100

Then when a few hours with the RAID, with Fujitsu tech falls (told me just server OS were backed) and attempting to get Fujitsu?s Server Start wizard CD (quite fastidious as it just will take exceptionally explicitly the forms of OS catalogued there) to aid putting the drivers required for Windows Server 2008, VMware ESX 3.0, .... I run over to BIOS and updated the SATA mode to local (non-RAID) and...Voila...no more requiring F6 attack drivers and the boot mechanism was found....nicely parceled both circles, instituted XP on parcel unified with 150 GB, designed the different plate as D for information and all is fine.
Reply With Quote
  #5  
Old 28-07-2011
Member
 
Join Date: Nov 2008
Posts: 1,066
Re: Unable to boot Econel 100

To start with I downloaded the final BIOS as of June 08 (6.0.1.8) and flashed them via USB. When that I had to prepare all USB apparatuses and BIOS, so it will distinguish the USB stay. Then put that USB on boot request no. 1. I make a point not to think you require the BIOS blaze to compose this work, actually is the more current BIOS so I figured could be preferable. Notwithstanding when that I did a speedy overhaul, I was equipped to establish XP on the machine by setting the SATA mode from either attack of pro back to local. That works.
Reply With Quote
  #6  
Old 28-07-2011
Member
 
Join Date: Nov 2008
Posts: 1,001
Re: Unable to boot Econel 100

Do you have a RAID card, or onboard (or product) RAID? In the event that you have a card, attempt reinstalling it, and verify that it?s not clashing with any onboard RAID. Now for the Operating System I imagine that you need to do something that has happened to the drive that the OS is on? Commonly, I could have set this up with a mirror set of 2 drives for the OS and requisitions and RAID 5 for information, with one blazing spare, unless the server is utilized for additional particular provisions. Is the OS on a non-RAID drive? Is it true that it is joined to the RAID card? Since you have a Serve RAID card, I'd prescribe that you utilize the Serve RAID setup plate that went together with the framework.
Reply With Quote
  #7  
Old 30-07-2011
Member
 
Join Date: Jul 2009
Posts: 1,113
Re: Unable to boot Econel 100

From the discourse going on to dispose of this situation I have I've found the variants to be altogether particular to the card, so don't actually utilize any Serve strike circle. Since the OS was not on the RAID 5 set, then modifying the exhibit didn't do anything. Did it express that the drive was outdated? In the event that it did, then it could be part of an attack set, but would be able to have been reflecting set. Beyond any doubt, I've uprooted and reinserted drives checked 'outdated' before and successfully reconstructed a cluster. I don't suggest this, but assuming that you don't have a spare, it may work extended enough to alternate the information.
Reply With Quote
Reply

  TechArena Community > Technology > Networking & Security
Tags: , , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "Unable to boot Econel 100"
Thread Thread Starter Forum Replies Last Post
Unable to boot GA 990 FXA UD3 motherboard Gunwanti Motherboard Processor & RAM 6 05-08-2011 01:49 AM
XP wont boot past option to boot to temp boot device and cant get to F8 option for advanced boot menu justliam Windows XP Support 1 23-04-2011 04:41 PM
Unable to boot MSI K9N SLI Zilar Motherboard Processor & RAM 5 08-04-2011 10:50 PM
Unable to get chkdsk to run at boot Jasonholt Windows XP Support 3 05-04-2009 09:16 PM
Unable to boot with my new config revolucioncg Motherboard Processor & RAM 5 05-01-2009 02:45 PM


All times are GMT +5.5. The time now is 03:42 AM.