Results 1 to 7 of 7

Thread: Malwarebytes program path removed and unable to run

  1. #1
    Join Date
    Mar 2011
    Posts
    280

    Malwarebytes program path removed and unable to run

    I have a Windows vista computer that while i attempt to load malwarebytes,cc cleaner otherwise super-anti spyware programs. These are able to load except while i run them they stopped down. I am able load them and update them. Even though one times you run them and they closed you come across the icon on the desktop has been modified and the path has been detached. The message tells this program has been altered in addition to detached.

  2. #2
    Join Date
    Feb 2010
    Posts
    390

    Re: Malwarebytes program path removed and unable to run

    Malwarebytes Anti-Malware uses Inno Setup , but not Installer Service Windows, if the installation to proceed normally leads to a crash, try to install the software and to scan in safe mode. Doing this is generally not recommended, because in safe mode, some lost their detection and removal of malware. After scanning and removing malware in safe mode, it is recommended to remove Malwarebytes Anti-Malware, then reboot into normal mode and repeat the installation and scanning.

  3. #3
    Join Date
    Feb 2010
    Posts
    488

    Re: Malwarebytes program path removed and unable to run

    Restart the computer in Safe Mode . Run a full scan. If you hang or error does not occur - then they were associated with either an active infection, or with any application or driver is not loaded in safe mode. If the system is free of malware, no further treatment "clean boot" and the inclusion of the alternate startup device drivers and applications can help you identify the conflict. If the scan in Safe mode freezes also occurred - this may indicate the presence of bad blocks on your hard drive.

  4. #4
    Join Date
    Feb 2010
    Posts
    641

    Re: Malwarebytes program path removed and unable to run

    • Click the "Start" and select "My Computer" (in Windows Vista / Seven - "Computer")
    • Click on the system disk, right-click and select "Properties"
    • Go to "Tools"
    • Click on the "Check Now"
    • Check the "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors"
    • Click the "Start".

    The system will prompt you to calendar this process at the moment of the next reboot; you must agree with the proposal and restart the computer. After rebooting the disk check will start automatically, do not interrupt it by pressing the buttons, wait for the check. May thus have to check all installed hard drives.

  5. #5
    Join Date
    Feb 2010
    Posts
    678

    Re: Malwarebytes program path removed and unable to run

    Make sure to check that you have installed the latest version of the following programs: Java JRE, Adobe Acrobat Reader, and Adobe Flash Player. If not, then be sure to update them. In addition, I suggest you purchase the full version of Malwarebytes Anti-malware that can help you protect your computer from possible contamination in the future. The main difference between the full versions of the free - is the presence of the module to protect your computer in real time.

  6. #6
    Join Date
    Feb 2010
    Posts
    669

    Re: Malwarebytes program path removed and unable to run

    If you have discovered on computer Trojans, viruses and additional malicious programs, it is cause to believe that all is normal with your antivirus and antispyware protection, if renewed program to the latest versions. First, become aware of that you have enabled automatic updates of Windows and each and every one obtainable updates have been installed. If you are unconfident, you must visit Windows Update, where you prompt similar to and what you could do with to upgrade Windows.

  7. #7
    Join Date
    Feb 2010
    Posts
    638

    Re: Malwarebytes program path removed and unable to run

    I recommend to anyone who asks me to either fix the installation path during installation every time, or just the Windows drive to keep so large that the programs can be installed in the default folder. Within individual programs can usually change even several paths that should be used where data may own. Makes sense, since with a Windows crash (which is normal and think things through very rarely use) any important data still exists on a different partition or hard disk. Generally, one should consider, however, when you're dealing with sensitive information and should not go spilling, to use a backup facility. Most programs have to be after a new installation of Windows installed again anyway. It will then usually also the settings are lost

Similar Threads

  1. Unable to enable protection module in Malwarebytes 1.65
    By PPandey in forum Networking & Security
    Replies: 3
    Last Post: 17-09-2012, 12:35 PM
  2. Replies: 7
    Last Post: 22-02-2012, 12:03 PM
  3. Replies: 5
    Last Post: 06-04-2011, 10:12 AM
  4. Replies: 3
    Last Post: 23-02-2011, 09:41 AM
  5. Unable to find files on removed hard drive
    By duckmouth in forum Hardware Peripherals
    Replies: 3
    Last Post: 23-11-2009, 01:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •