Netgear WNDR3700 - 2.4 ghz undetectable

[Cosmonos]

Hello, In this month I purchase a WNDR3700, until now it is been huge. But yesterday where each and every one of the unexpected the 2.4 ghz signal cannot be sense by anything. The majority of the devices are able to just observe the 2.4 as a result sure this is a problem. The stuff I attempted were power down reset as well as factory reset as well as disabling the 5 ghz signal as well as lowering the maximum speed of the 2.4 ghz as well as changing wireless channels. If anybody has an thoughts or suggestions regarding to this issue would be greatly appreciated.

[BiGMaCHiNe]

It does appear on the way to be broadcasting a signal, however extremely weak, if you position inside 3 or else 4 feet from it, it is able to be detected. 1) Ensure router is NOT sitting subsequent to 2.4ghz cordless phone bottom position, little one monitor of any that is 2.4Ghz devices.If you reside in saturated area that make use of 2.4Ghz by a lot of additional users, you might need to verify for channel interference as well as alter on the way to any of 1 or 6 or 11.

[Connect_Me]

It is close to a cordless phone base; however it is a 6 ghz. I attempted unplugging it previous to presently on the way to be sure. I attempted channels 1 or 6 or 11 furthermore even though I am not completely certain what I am looking for by means of that insider means I did observe from it that there was just one N/W on 7 as well as not any on 8 so I attempted those, did not assist unluckily.

[Wguy2008]

The last thing I am able to imagine of is attempt moving it at the same time as close as achievable on the way to the other PC that is able to observe the signal. Dishonor, the thing is just similar to two weeks past the one month for a return. Has the firmware presently been updated at the DGND3300v2 is having the similar troubles subsequent to most recent firmware update.

[Pabloa]

I have presently updated my DGND3300v2 on the way to the most recent firmware version 2.1.00.46.Without a doubt the wireless G signal is not working within the firmware update. So after this I download an elder version of firmware as well as make use of this it functions! I am currently using firmware version V2.1.00.41_1.00.41.