Can we use cablenut settings for 30/1 Cable Connection

[X-quisite]

Hello friends I am using the 20/1 connection for the internet on my home computer system and I am also using the cablenut settings with this connection to optimize the net speed. . I would want to know that can i use the cablenut settings for30/1 connection to boost the speed of the internet. If yes than I would want to know which are all the settings that are required to make the connection successful using the 30/1 connection.

[teenQ]

Hey think that can use the same settings for the 30/1 connection as you have used for the 20/1 cable connection. There is not much of the difference between the two of them except the speed which they carry. So I guess that you can use the same cablenut settings that you have used with the 20/1 cable connection. This will increase your speed a much more than you desire.

[Visala28]

Cablenut is just a tool for increasing the sped of the internet which you are currently using. Cablenut is compatible with all the kind of internet connection that are there. The settings for the cablenut will be similar in all the cases of the internet connection. You can make your own CableNut Custom Setting files and save them for later use. Thus the settings which you have for the 20/1 connection will be almost similar to the 30/1 connection. You can go into the registry to get the settings of the 20/1 cable connection.

[X-quisite]

Hey I did as you all said, while configuring the 30/1 cable connection I used the same setting that I had for the 20/1 connection. But still I am not able to successfully activate the 30/1 connection as it shows that there is some kind of error in the setting. Now what should I do to make the connection active, I have tried as you all have said but still getting the error. Please hep me to solve this issue as i have given up with the 20/1 cable connection and left with only the 30/1 connection which is still not active.

[Sabastiaan]

Hey is used my 20/1 cablenut settings and was successfully able to active the 30/1 cable connection with that setting. You can see my setting and see if you find of any kind of error in the setting or you have missed anything in the setting.

• DefaultReceiveWindow = 1027840
• DefaultSendWindow = 65535
• DisableAddressSharing = 1
• InitialLargeBufferCount = 200
• InitialMediumBufferCount = 480
• InitialSmallBufferCount = 640
• LargeBufferSize = 819200
• MaxFastTransmit = 64000
• MediumBufferSize = 150400
• Priority Boost = 0
• SmallBufferSize = 12800
• TransmitWorker = 32
• FastSendDatagramThreshhold = 4096
• EnableFastRouteLookup = 1
• EnablePMTUDiscovery = 1
• IgnorePushBitsOnReceives = 0
• GlobalMaxTcpWindowSize = 1027840
• MaxFreeTcbs = 8000
• MaxHashTableSize = 16384
• MaxNormLookupMemory = 5000000
• SackOpts = 1
• SynAttackProtect = 1
• Tcp1323Opts = 1
• TcpLogLevel = 1
• TcpMaxDupAttacks = 2
• TcpMaxHalfOpen = 100
• TcpMaxHalfOpenRetired = 80
• TcpRecvSegmentSize = 1460
• TcpSendSegmentSize = 1460
• TcpTimedWaitDelay = 30
• TcpUseRFC1122UrgentPointer = 0
• TcpWindowSize = 1027840
• MaxConnectionsPer1_0Server = 20
• MaxConnectionsPerServer = 10
• DefaultTimeToLive = 64
• DefaultUserTOSSetting = 0
• TcpMaxDataRetransmissions = 13
• DefaultTOSValue = 240

You have to exactly use the same setting for the 30/1 cable connection inorder to run the connection smoothly.