Results 1 to 5 of 5

Thread: Network disconnect/reconnects every couple of minutes

  1. #1
    Join Date
    Jul 2010
    Posts
    120

    Network connects and disconnect every couple of minutes

    I am a subscriber internet club , that's 6 times in 8 months that my ADSL connection does not work, it must add filters more powerful ? My Network disconnect/reconnects every couple of minutes. It there any solution ? They tell me it's not their fault ! are there any subscribers Int Club which have the same problem ? thank you.

  2. #2
    Join Date
    Jan 2006
    Posts
    4,545

    Re: Network disconnect/reconnects every couple of minutes

    I solved the problem with this manipulation : Go to start menu, then run type cmd then enter, arrive you back online, here you type netsh winsock reset then enter, after you type netsh firewall reset then enter, you restart the PC and go again.
    1. Disconnection concerns that we know are not due to FreeBox , if not all computers should sever their connections at the same time, which is not the case.
    2. It is a problem from the Mac , if the Windows PC should know the same problem.

  3. #3
    Join Date
    Jan 2006
    Posts
    7,109

    Re: Network disconnect/reconnects every couple of minutes

    The question is whether it is Windows that manages the wireless connection for this am that manip :
    1 - Open network connections by going to : Start - > Control Panel -> Network Connections.
    2 - Make right-click on the " Wireless Network Connection " and corresponding "Properties " .
    3 - On the Wireless Networks tab , check Use Windows to configure my wireless network.
    If this tab does not exist, then go to Start - > Run and type " services.msc "and click OK .
    - click " Wireless Zero Configuration "in the General tab , choose "Automatic "to "Startup Type "and then click OK.
    Back in the " Network Connection " and repeat step 2 .
    4 - Click OK.

  4. #4
    Join Date
    Jan 2006
    Posts
    3,792

    Re: Network disconnect/reconnects every couple of minutes

    This problem may occur if the VPN servers have been configured to use two PPTP tunnels, and if the end establishes the PPTP control channel is performed (Network Address Translation ). NAT can be active if it has been configured in the Routing and Remote Access Service or the Internet Firewall Security and Acceleration ( ISA ) Server is started. When NAT is running on a server routing and remote access VPN, all outbound connections are subject to the range of NAT. and Remote Access uses a NAT editor for PPTP packets to translate and make sure that packets received on the public side of NAT is delivered to the appropriate port on the private side.

  5. #5
    Join Date
    Feb 2008
    Posts
    2,635

    Re: Network disconnect/reconnects every couple of minutes

    Check the steps:
    1. Open the MMC and Remote Access Routing and then expand the server .
    2. Click the right mouse button Routing Interfaces Then click New socket at the request .
    3. Click Next to start the wizard.
    4. In the dialog box interface name , Use the _ SiteA Interface SiteBThen click Next .
    5. In the dialog box Connection Type , Click Connect using virtual private network ( VPN ) Then click Next .
    6. In the dialog box VPN Click the Point to Point Protocol (PPTP tunneling ) Then click Next .
    7. In the dialog box Destination Address , Type the IP address or DNS name of the destination VPN server , then click Next .
    8. In the dialog box Protocols and Security Do not change the default settings , then click Next .
    9. In the dialog box Dial Out Credentials , Use SiteB _ SiteA as user name, type the domain name and password , then click Next , And then click Finish .
    10. Click the right mouse button on the newly created dial interface to the application, then click Properties .
    11. Tab Options , Change connection type Permanent Connection Then click OK .
    12. Expand IP routing Then click Static Routes .
    13. Click the right mouse button on static route Then click New static route .
    14. In the list Interface Click on the new interface _ SiteASiteB.
    15. In the field destination Type the destination network SiteB.
    16. In the field Netmask , type the subnet mask for SiteB and then click OK .

Similar Threads

  1. Nokia E71 screen goes blank for a couple of minutes
    By seagullplayer in forum Portable Devices
    Replies: 4
    Last Post: 12-09-2011, 02:52 PM
  2. GoFlex Desk 2T USB disconnect and then reconnects
    By Lyudmyla in forum Hardware Peripherals
    Replies: 5
    Last Post: 23-07-2011, 10:33 AM
  3. Strong Signal but reconnects every few minutes
    By Reputator in forum Networking & Security
    Replies: 5
    Last Post: 09-04-2011, 10:52 AM
  4. Replies: 2
    Last Post: 23-02-2010, 06:03 AM
  5. Printer ports shared with NET USE disconnect after few minutes
    By sivaranjan in forum Windows Vista Network
    Replies: 2
    Last Post: 07-12-2007, 06:44 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,645,135.47092 seconds with 17 queries