Setting up a Linksys Router WRT54G

[Latafat]

I have comprise a innovative Linksys router WRT54gs and a innovative Dell laptop. The router works well by means of the cable attached additional than when I go to wireless I get a strong signal additional than not capable to get on the internet by means of WEP security. By means of security put out of action the wireless works fine. Additional than determine to not connect to the internet by means of WEP security on. I tried to utilize the CD install disk that comes by means of the router additional than does not assist. Resetting WRT5AG should fix the tribulations. Additional than in random period of times, it determine to come back the entire in excess of again.

[Sabastiaan]

The Linksys WRT54G is a wireless router premeditated for utilize in a home office or diminutive business network. The WRT54G determine to permit you to share a high-speed Internet association, via Ethernet, by means of up to four systems; you might in addition connect 802.11g- and 802.11b-enabled devices to the router via a wireless correlation. The apparatus is accomplished of wireless transfer rates of up to 54 Mps (802.11g), and characteristics WEP encryption, a built-in firewall, two separable antennae and Linksys's "SpeedBooster" technology, designed to improve wireless network presentation by up to 35 percent.

[Visala28]

You have to open the network administration control panel for your operating system (in Windows, open the "Start" menu, choose "Control Panel" and twice hit it off on the "Network Connections" icon; in OS X, open the "Apple" menu, choose "System Preference" and hit it off on the icon labeled "Network"). Organize your network settings. In Windows, twice hit it off on the icon labeled "Local Area correlation," hit it off on the button labeled "Properties," hit it off on the alternative labeled "Internet Protocol (TCP/IP)," choose the alternative labeled "Obtain an IP address mechanically" and hit it off "OK" twice. In OS X, choose "Using DHCP" from the pull-down menu labeled "Configure IPv4." Repeat this procedure by means of several additional systems you wish to attach to the router.

[teenQ]

In this you have to comprise or encompass and open your Web browser and enter "192.168.1.1" in the address field. When encouraged, put down the "User Name" field blank and enter "admin" in the "Password" field. Position the wireless mode menu and choose the suitable alternative, based on the types of devices you desire to attach to your network (if uncertain, choose "Mixed"). Choose an exceptional SSID name and enter it in the suitable field; hit it off "Apply." hit it off on the button labeled "Enable" next to the alternative labeled "WEP." hit it off on the button labeled "Edit WEP Settings" and enter your preferred sanctuary information in sequence. Create a note of these settings; then hit it off "Apply." Restart your system(s). For those systems you aspiration to connect wirelessly, open their network configuration screens and enter the sanctuary information in sequence in the appropriate fields. Setup is at present complete.

[MaCiNToSHeR]

To create certain optimal indication strength, place your router in a location central to the entire connected systems, by means of as a small number of walls and additional obstacles in line of sight as probable. If your ISP requires authentication, such as a DSL service, you determine to need to enter your ISP user name and password into the router arrangement to permit the Internet connectivity. You basically necessitate resetting your router to defaulting settings and then start it the entire in excess of again from there. In view of the fact that resetting my router (factory defaulting) to try and get back the password fortification, and your entry solved my tribulations.

[Balamohan]

If you have comprise or encompass WRT54G: you basically push reset for 10secs, or until the orange light goes off. Continue to grasp the reset button until the green light turns off. (This be supposed to return the router to factory settings). Then you have to go to the system by means of wireless capabilities. After that you have to open internet explorer. Then you have to type 192.168.1.245 in the address line. When it asks for user/pass merely put 'admin' in the password line. Some newer models require together. Then press enter. You determine to in addition desire to upgrade the firmware on the router if it does not have comprise the most up to date version or description, this determine to be an admin alternative. Create certain the version numeral on the linksys web-site. Configure the router, I suggest WPA2 for sanctuary and of course change the login password for your router config to maintain people out maintain in mind that each time you save a setting you determine to have to re-connect to the internet.