D-LINK DI 504 router to share Internet access configuration

[Agneya]

Hi all,

Broadband Routers are generally W-based visual settings page mode interface through the browser enter the address to open the management interface. To be able to access to this interface, we need for a computer used to configure the broadband router to network configuration. All the best.

[Steve123]

DI-504 Broadband Router's default management IP address is: 192.168.0.1; default subnet mask: 255.255.255.0, these addresses were made by the basic settings in your future can be revised. Will be connected to the computer's IP address configuration into the DI-540 broadband router with the same network segment of the IP. Such as: IP: 192.168.0.3, Mask: 255.255.255.0, gateway (that is, management of the router's default IP): 192.168.0.1. All the best.

[Shen]

After the finish of this configuration can be ready to formally DI-504 broadband router is set to visit and further. Launch your browser, type in the address bar: http://192.168.0.1, to establish a connection after the pop-up login window, enter the administrator user name: ADMIN, Password: (for the empty set and be sure to set up), click "OK" button into the management interface, the basic set up on the "Home" inside, including the WAN (wide area network settings), LAN (local area network settings), DHCP service settings. Check and reply.

[Big Fish]

Wide Area Network Settings is set up for broadband access lines, due to the user to select different types of broadband access lines, where access to correspond to their own way - the network service provider lines. There are three types of WAN: Dynamic IP address; a fixed IP address; PPPoE dial-up, we have to the actual line type according to their own choice to set one of them. All the best.

[Zachary]

LAN settings is to set the router's own IP address (this is the entire internal network gateway IP, in our host for the allocation of IP within the network, the use to). The default IP is 192.168.0.1, subnet mask is 255.255.255.0, we want according to our actual IP within the network planning scheme amendments. Click on "implementation" to complete. Check and reply.

[Snake08]

D-LINK DI 504 router is an optional setting, not a must. We are optional "activation" is set to assume the router DHCP server function, used to host within the network automatically assigns IP addresses. It should be assigned to set the starting and ending IP address range, the lease time. Click on "implementation" to complete. Completion of the first and second set after the network should be able within the network that provide shared Internet access service. Check and reply.