Netgear wpn824 HELP

[Juaquine]

Hello to all,
I am having this problem when I bought Netgear wpn824. I recently bought a cool new Netgear WPN824 router for connecting my Wii to to the internet, but I unable to do this. It means I unable to connect to internet using Netgear WPN824 router. Anyone else having the same problem. Please help me.
Thank you.

[Jackson2]

You have to restart your network to fix this problem. Be sure to restart your network in following sequence:
1) Turn off the modem, wireless router, and computer;
2) Turn on the modem, wait two minutes;
3) Turn on the wireless router and wait 1 minute;
4) Turn on the computer.

[johnson22]

Make sure the Ethernet cables are securely plugged in.
1. The Internet status light on the wireless router will be lit if the Ethernet cable to the wireless
router from the modem is plugged in securely and the modem and wireless router are turned
on.
2. For each powered on computer connected to the wireless router with a securely plugged in
Ethernet cable, the corresponding wireless router LAN port status light will be lit. The label on
the bottom of the wireless router identifies the number of each LAN port.

[Trio]

From your information it seems that you have use wrong setting for your router and that's why you are getting such type of problem. You have to use following setting to fix this problem.
Config Info: Launch Browser,Enter default IP
Default IP: http://192.168.1.1
User Name: admin
Password: password

You can find the Router's Settings in following ways.
SSID NETGEAR: Found in "Wireless" tab
WEP/WPA: Found in "Wireless" tab
DHCP: Found in "LAN IP Settings" of the "Advanced" tab
DNS Info: Found in the "Basic Settings " area of the "Setup" tab
Broadcast: Found in the "Wireless Setup" are of the "Advanced" tab

[deveritt]

Make sure the wireless settings in the computer and router match exactly.
The Wireless Network Name (SSID) and WEP settings of the router and wireless computer must match exactly. If wireless settings in the computer and router does not match properly then you will not bale to connect to internet.
I hope this will help you.

[Techguru01]

I don't know whether it is right or not but try to do this.
1.First try to updated firmware of WPN824v2 router.
2.Now try to disabled SPI firewall of your router.
3.You have to add WII for allowing MAC address setup & try to switch on access control.
4.In Wii try to put BTU value as 1,500.
5.Try to convert channel to 1 or 11 on router.
I hope one of above will help you.