DOS commands used in LAN

[KennedII]

Hi everybody,

Ping is a high frequency use of the utility used to determine whether the local host with another host exchange (send and receive) data reported. According to the returned information, we can infer TCP / IP parameters are set correctly and run too are normal. I want to know that apart from ping what DOS commands used in LAN. I am using windows server 2008. Check and reply.

[Snake08]

You can use Ping with the machine IP. This command was sent to our computers configured IP address, our computers should always be made to the Ping command-response, if not, then the local configuration or installation problem. When this problem occurs, LAN users should disconnect the network cable and then re-send the command. If the network cable disconnected after this order is correct, then that another computer may be configured the same IP address. Check and reply.

[Zachary]

Use Ping with other IP LAN. This command should not leave our computers, through network card and network cable to reach the other computer, and then return. Receive the echo response shows that the local network card and carriers operating correctly. However, if you receive 0 echo reply, then that subnet mask (for sub-network division, it will be the network IP address with the host part of the separate parts of the code) is incorrect or the network card configuration errors or cable systems in question. All the best.

[Shen]

You can use some more command like ping with the gateway IP. This command, if response is correct, that the LAN gateway router is running and able to make a response. Ping the remote IP commnd is work if you receive four replies, indicated that the successful use of the default gateway. For dial-up Internet users, said to a successful visit to Internet (but does not rule out the ISP's DNS will have issues). All the best.

[Steve123]

Netstat is used to display and the IP, TCP, UDP and ICMP protocol-related statistics, are generally used for testing the various ports of this machine's network connections. If we receive data from the computer sometimes will lead to errors reported data deletion or failure, we should not be surprised, TCP / IP can allow these types of errors, and can automatically resend packets. However, if the cumulative number of accounting errors of the IP datagram received a large percentage, or its number is rapidly increasing, then we should use the Netstat check out Why is there such situations. Check and reply.

[Milton.J]

You van use Netstat Cs command. This option is in accordance with various agreements were to demonstrate its statistics. If our applications (such as the Web browser) to run more slowly, or not show the data like Web pages, then you can use this option to check the information displayed. yo need to carefully view the statistics lines, find an error keywords, and to determine the problem. All the best.