How to create multiple VLAN Ethernet Case

[Amma-Watson]

Hi all,

I have a typical local area network that means by a three-tier exchange function with the core of the switch then several branches of the switch. We assume that the core of the switch name: com; branch of the switch were: par1, par2, par3, respectively, through port 1 light module and the core switches connected to; and assume that the name vlan respectively counter, market, managing etc. I want to know that how to create multiple VLAN Ethernet Case. Please suggest. Thanks in advance.

[Steve123]

First you need to do following process,
(1) Set vtp domain (core, branches are set on the switch).
(2) Configure the relay (core, branches are set on the switch).
(3) Create a vlan (in the server set up).
(4) The switch port assigned to vlan.
(5) Three-tier exchange of configuration.

Set exchange vtp update information to all switches must be configured for the same management domain. If all the switches are connected to trunk lines, then as long as the core switch to set a management domain, all the switches on the network have joined the domain, so that management domain where all the switches will be able to understand each others vlan list.

[Shen]

You also need to configure the relay in order to ensure management domain that covers all branches of the switch, you must configure the relay. Cisco switches can support any media as a trunk, in order to achieve the relay can use its unique isl tag. isl (inter-switch link) is a switch between the switches and routers, switches and servers and between the multiple vlan to pass between the information and vlan protocol data stream, by directly connected to the switch port configuration isl package, you can across the entire network switch vlan allocation and configuration. All the best.

[Big Fish]

Create a vlan, once established, the management domain, you can create a vlan.
where vlan is created in the core switch, in fact, as long as any in the management of the domain property of a vtp switch for the server to create vlan, it will notice the entire management domain through vtp all the switches. However, if you want a specific switch port assigned to a vlan, the port must be set on the switch belongs. Check and reply.

[Zachary]

If you need to setup the three-tier exchange of configuration. Here, vlan has been basically completed division. However, vlan how to achieve between the three return, all the nodes assigned to vlan static ip address; Second, all the nodes assigned to vlan dynamic ip address. Here's both cases is presented separately. Vlan counter hypothesis to the distribution of the interface ip address 172.16.58.1/24, Web address: 172.16.58.0, vlan market interface ip address assigned 172.16.59.1/24, Web address: 172.16.59.0, vlan managing the allocation of interface ip address 172.16.60.1/24, the network address is 172.16.60.0. If the dynamic allocation of ip addresses, set network dhcp server ip address is 172.16.1.11. Check and reply.

[Snake08]

You need to assigned to all nodes in a static ip address. First, the core switches, respectively, to set the vlan interface ip address. Vlan core switch will be treated as an interface, like the same as the router.And then the computer at all access vlan set vlan their respective network address of the same ip address and set the default gateway address of the interface for the vlan. You can all of the nodes in the allocation of vlan dynamic ip address. First, the core switches, respectively. Set the vlan interface ip address and the same dhcp server ip address. Finally, the access vlan's computer network settings, the ip address option is set to automatically obtain ip address. Check and reply.