Go Back   TechArena Community > Technology > Networking & Security
Become a Member!
Forgot your username/password?
Register Tags Active Topics RSS Search Mark Forums Read

Sponsored Links



eth1 - SIOCSIFFLAGS Device or resource busy

Networking & Security


Reply
 
Thread Tools Search this Thread
  #1  
Old 02-02-2010
Member
 
Join Date: Jan 2010
Posts: 324
eth1 - SIOCSIFFLAGS Device or resource busy
  

Being the proud user of version IpCop .16, I had the bad idea to update to .17 and .18. I've been more active in blue area. Let me explain my config:

Server 1U - 3.00Ghz - 1GB
Card Quad port Gigabit Intel

Red Zone: MODEM IP fixed
Orange Zone (server) IP's Fixed (192.168.100.xx)
Green Zone (work stations) DHCP 192.168.1.2 - 192.168.1.254
Blue Zone(laptop) DHCP 192.168.2.100 - 192.168.2.254

Following the update, the machine is in the blue zone and no longer had any connection (limited or no connection), I tried to force the assignment of IP (ipconfig /renew), but to no avail.

So I rebooted the ipcop and I have read

rules firewall
siocsifflags : device or resource busy

So I searched on google, and I think it could come from a concern IRQ. Did I screwed that in the update?

Here is the complete log, the part that seems interesting is resumed below in red. I am not at all Linux Guy, but I'm ready to learn.

Quote:
Jan 22 21:53:23 fw syslogd 1.4.1: restart.
Jan 22 21:53:23 fw kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 22 21:53:23 fw kernel: Inspecting /boot/System.map-2.4.34-smp
Jan 22 21:53:23 fw kernel: Loaded 12453 symbols from /boot/System.map-2.4.34-smp.
Jan 22 21:53:23 fw kernel: Symbols match kernel version 2.4.34.
Jan 22 21:53:23 fw kernel: Loaded 200 symbols from 8 modules.
Jan 22 21:53:23 fw kernel: Linux version 2.4.34-smp (root@barton) (gcc version 3.3.3) #1 SMP Mon Jul 16 23:04:20 GMT 2007
Jan 22 21:53:23 fw kernel: BIOS-provided physical RAM map:
Jan 22 21:53:23 fw kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Jan 22 21:53:23 fw kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Jan 22 21:53:23 fw kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 22 21:53:23 fw kernel: BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
Jan 22 21:53:23 fw kernel: BIOS-e820: 000000001f6e0000 - 000000001f6e3000 (ACPI NVS)
Jan 22 21:53:23 fw kernel: BIOS-e820: 000000001f6e3000 - 000000001f6f0000 (ACPI data)
Jan 22 21:53:23 fw kernel: BIOS-e820: 000000001f6f0000 - 000000001f700000 (reserved)
Jan 22 21:53:23 fw kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Jan 22 21:53:23 fw kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jan 22 21:53:23 fw kernel: 0MB HIGHMEM available.
Jan 22 21:53:23 fw kernel: 502MB LOWMEM available.
Jan 22 21:53:23 fw kernel: found SMP MP-table at 000f3580
Jan 22 21:53:23 fw kernel: hm, page 000f3000 reserved twice.
Jan 22 21:53:23 fw kernel: hm, page 000f4000 reserved twice.
Jan 22 21:53:23 fw kernel: hm, page 000f1000 reserved twice.
Jan 22 21:53:23 fw kernel: hm, page 000f2000 reserved twice.
Jan 22 21:53:23 fw kernel: On node 0 totalpages: 128736
Jan 22 21:53:23 fw kernel: zone(0): 4096 pages.
Jan 22 21:53:23 fw kernel: zone(1): 124640 pages.
Jan 22 21:53:23 fw kernel: zone(2): 0 pages.
Jan 22 21:53:23 fw kernel: ACPI: RSDP (v000 IntelR ) @ 0x000f7780
Jan 22 21:53:23 fw kernel: ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1f6e3040
Jan 22 21:53:23 fw kernel: ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1f6e30c0
Jan 22 21:53:23 fw kernel: ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1f6e7540
Jan 22 21:53:23 fw kernel: ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1f6e7440
Jan 22 21:53:23 fw kernel: ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x1f6e75c0
Jan 22 21:53:23 fw kernel: ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20041203) @ 0x1f6e7a50
Jan 22 21:53:23 fw kernel: ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x03000000) @ 0x00000000
Jan 22 21:53:23 fw kernel: ACPI: Local APIC address 0xfee00000
Jan 22 21:53:23 fw kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jan 22 21:53:24 fw kernel: Processor #0 Unknown CPU [15:6] APIC version 20
Jan 22 21:53:24 fw kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jan 22 21:53:24 fw kernel: Processor #1 Unknown CPU [15:6] APIC version 20
Jan 22 21:53:24 fw kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Jan 22 21:53:24 fw kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Jan 22 21:53:24 fw kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jan 22 21:53:24 fw kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jan 22 21:53:24 fw kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Jan 22 21:53:24 fw kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Jan 22 21:53:24 fw kernel: Using ACPI for processor (LAPIC) configuration information
Jan 22 21:53:24 fw kernel: Intel MultiProcessor Specification v1.4
Jan 22 21:53:24 fw kernel: Virtual Wire compatibility mode.
Jan 22 21:53:24 fw kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Jan 22 21:53:24 fw kernel: I/O APIC #4 Version 17 at 0xFEC00000.
Jan 22 21:53:24 fw kernel: Enabling APIC mode: Flat.^IUsing 1 I/O APICs
Jan 22 21:53:24 fw kernel: Processors: 2
Jan 22 21:53:24 fw kernel: Kernel command line: root=/dev/hda4 panic=10 acpi=ht ro
Jan 22 21:53:24 fw kernel: Initializing CPU#0
Jan 22 21:53:24 fw kernel: Detected 2992.631 MHz processor.
Jan 22 21:53:24 fw kernel: Console: colour VGA+ 80x25
Jan 22 21:53:24 fw kernel: Calibrating delay loop... 5976.88 BogoMIPS
Jan 22 21:53:24 fw kernel: Memory: 506216k/514944k available (1340k kernel code, 8340k reserved, 374k data, 116k init, 0k highmem)
Jan 22 21:53:24 fw kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Jan 22 21:53:24 fw kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Jan 22 21:53:24 fw kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 22 21:53:24 fw kernel: Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 22 21:53:24 fw kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Jan 22 21:53:24 fw kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Jan 22 21:53:24 fw kernel: CPU: Physical Processor ID: 0
Jan 22 21:53:24 fw kernel: Intel machine check architecture supported.
Jan 22 21:53:24 fw kernel: Intel machine check reporting enabled on CPU#0.
Jan 22 21:53:24 fw kernel: Enabling fast FPU save and restore... done.
Jan 22 21:53:24 fw kernel: Enabling unmasked SIMD FPU exception support... done.
Jan 22 21:53:24 fw kernel: Checking 'hlt' instruction... OK.
Jan 22 21:53:24 fw kernel: Checking for popad bug... OK.
Jan 22 21:53:24 fw kernel: POSIX conformance testing by UNIFIX
Jan 22 21:53:24 fw kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Jan 22 21:53:24 fw kernel: CPU: Physical Processor ID: 0
Jan 22 21:53:24 fw kernel: Intel machine check reporting enabled on CPU#0.
Jan 22 21:53:24 fw kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 05
Jan 22 21:53:24 fw kernel: per-CPU timeslice cutoff: 45.71 usecs.
Jan 22 21:53:24 fw kernel: enabled ExtINT on CPU#0
Jan 22 21:53:24 fw kernel: ESR value before enabling vector: 00000000
Jan 22 21:53:24 fw kernel: ESR value after enabling vector: 00000000
Jan 22 21:53:24 fw kernel: Booting processor 1/1 eip 3000
Jan 22 21:53:24 fw kernel: Initializing CPU#1
Jan 22 21:53:25 fw kernel: masked ExtINT on CPU#1
Jan 22 21:53:25 fw kernel: ESR value before enabling vector: 00000000
Jan 22 21:53:25 fw kernel: ESR value after enabling vector: 00000000
Jan 22 21:53:25 fw kernel: Calibrating delay loop... 5976.88 BogoMIPS
Jan 22 21:53:25 fw kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Jan 22 21:53:25 fw kernel: CPU: Physical Processor ID: 0
Jan 22 21:53:25 fw kernel: Intel machine check reporting enabled on CPU#1.
Jan 22 21:53:25 fw kernel: CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 05
Jan 22 21:53:25 fw kernel: Total of 2 processors activated (11953.76 BogoMIPS).
Jan 22 21:53:25 fw kernel: cpu_sibling_map[0] = 1
Jan 22 21:53:25 fw kernel: cpu_sibling_map[1] = 0
Jan 22 21:53:25 fw kernel: ENABLING IO-APIC IRQs
Jan 22 21:53:25 fw kernel: Setting 4 in the phys_id_present_map
Jan 22 21:53:25 fw kernel: ...changing IO-APIC physical APIC ID to 4 ... ok.
Jan 22 21:53:25 fw kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Jan 22 21:53:25 fw kernel: testing the IO APIC.......................
Jan 22 21:53:25 fw kernel:
Jan 22 21:53:25 fw kernel: .................................... done.
Jan 22 21:53:25 fw kernel: Using local APIC timer interrupts.
Jan 22 21:53:25 fw kernel: calibrating APIC timer ...
Jan 22 21:53:25 fw kernel: ..... CPU clock speed is 2992.6840 MHz.
Jan 22 21:53:25 fw kernel: ..... host bus clock speed is 199.5121 MHz.
Jan 22 21:53:25 fw kernel: cpu: 0, clocks: 1995121, slice: 665040
Jan 22 21:53:25 fw kernel: CPU0<T0:1995120,T1:1330080,D:0,S:665040,C:1995121>
Jan 22 21:53:25 fw kernel: cpu: 1, clocks: 1995121, slice: 665040
Jan 22 21:53:25 fw kernel: CPU1<T0:1995120,T1:665040,D:0,S:665040,C:1995121>
Jan 22 21:53:25 fw kernel: checking TSC synchronization across CPUs: passed.
Jan 22 21:53:25 fw kernel: Waiting on wait_init_idle (map = 0x2)
Jan 22 21:53:25 fw kernel: All processors have done init_idle
Jan 22 21:53:25 fw kernel: ACPI: Subsystem revision 20040326
Jan 22 21:53:26 fw kernel: ACPI: Interpreter disabled.
Jan 22 21:53:26 fw kernel: PCI: PCI BIOS revision 3.00 entry at 0xf9420, last bus=8
Jan 22 21:53:26 fw kernel: PCI: Using configuration type 1
Jan 22 21:53:26 fw kernel: PCI: Probing PCI hardware
Jan 22 21:53:26 fw kernel: PCI: Probing PCI hardware (bus 00)
Jan 22 21:53:26 fw kernel: PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Jan 22 21:53:26 fw kernel: Transparent bridge - PCI device 8086:244e
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B0,I1,P0) -> 16
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B0,I2,P0) -> 16
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B0,I28,P0) -> 16
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B0,I28,P0) -> 16
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B0,I28,P1) -> 17
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B0,I31,P1) -> 19
Jan 22 21:53:26 fw last message repeated 2 times
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B3,I0,P0) -> 16
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B3,I0,P1) -> 17
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B4,I0,P0) -> 17
Jan 22 21:53:26 fw kernel: PCI->APIC IRQ transform: (B4,I0,P1) -> 18
Jan 22 21:53:27 fw kernel: Linux NET4.0 for Linux 2.4
Jan 22 21:53:27 fw kernel: Based upon Swansea University Computer Society NET3.039
Jan 22 21:53:27 fw kernel: Initializing RT netlink socket
Jan 22 21:53:27 fw kernel: Starting kswapd
Jan 22 21:53:27 fw kernel: Journalled Block Device driver loaded
Jan 22 21:53:27 fw kernel: pty: 256 Unix98 ptys configured
Jan 22 21:53:27 fw kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Jan 22 21:53:27 fw kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Jan 22 21:53:27 fw kernel: Real Time Clock Driver v1.10f
Jan 22 21:53:27 fw kernel: Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
Jan 22 21:53:27 fw kernel: floppy0: no floppy controllers found
Jan 22 21:53:27 fw kernel: RAMDISK driver initialized: 16 RAM disks of 5120K size 1024 blocksize
Jan 22 21:53:27 fw kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Jan 22 21:53:27 fw kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 22 21:53:27 fw kernel: hda: WDC WD800JD-00LSA5, ATA DISK drive
Jan 22 21:53:27 fw kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 22 21:53:27 fw kernel: hda: attached ide-disk driver.
Jan 22 21:53:27 fw kernel: hda: host protected area => 1
Jan 22 21:53:27 fw kernel: hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63
Jan 22 21:53:27 fw kernel: Partition check:
Jan 22 21:53:27 fw kernel: hda: hda1 hda2 hda4
Jan 22 21:53:27 fw kernel: Initializing Cryptographic API
Jan 22 21:53:27 fw kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 22 21:53:27 fw kernel: IP Protocols: ICMP, UDP, TCP
Jan 22 21:53:28 fw kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Jan 22 21:53:28 fw kernel: TCP: Hash tables configured (established 32768 bind 32768)
Jan 22 21:53:28 fw kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 22 21:53:28 fw kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Jan 22 21:53:28 fw kernel: EXT3-fs: write access will be enabled during recovery.
Jan 22 21:53:28 fw kernel: kjournald starting. Commit interval 5 seconds
Jan 22 21:53:28 fw kernel: EXT3-fs: recovery complete.
Jan 22 21:53:28 fw kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 22 21:53:28 fw kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jan 22 21:53:28 fw kernel: Freeing unused kernel memory: 116k freed
Jan 22 21:53:28 fw kernel: frandom: Seeded global generator now (used by erandom)
Jan 22 21:53:28 fw kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Jan 22 21:53:28 fw kernel: apm: disabled - APM is not SMP safe.
Jan 22 21:53:28 fw kernel: usb.c: registered new driver usbdevfs
Jan 22 21:53:28 fw kernel: usb.c: registered new driver hub
Jan 22 21:53:28 fw kernel: usb-uhci.c: $Revision: 1.275
Jan 22 21:53:28 fw kernel: usb-uhci.c: High bandwidth mode enabled
Jan 22 21:53:28 fw kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 22 21:53:28 fw kernel: SCSI subsystem driver Revision: 1.00
Jan 22 21:53:28 fw kernel: Initializing USB Mass Storage driver...
Jan 22 21:53:28 fw kernel: usb.c: registered new driver usb-storage
Jan 22 21:53:28 fw kernel: USB Mass Storage support registered.
Jan 22 21:53:28 fw kernel: usb.c: registered new driver hiddev
Jan 22 21:53:28 fw kernel: usb.c: registered new driver hid
Jan 22 21:53:28 fw kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Jan 22 21:53:28 fw kernel: hid-core.c: USB HID support drivers
Jan 22 21:53:28 fw kernel: usb.c: registered new driver acm
Jan 22 21:53:28 fw kernel: acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 22 21:53:28 fw kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
Jan 22 21:53:28 fw kernel: kjournald starting. Commit interval 5 seconds
Jan 22 21:53:28 fw kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Jan 22 21:53:28 fw kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 22 21:53:29 fw kernel: kjournald starting. Commit interval 5 seconds
Jan 22 21:53:29 fw kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Jan 22 21:53:29 fw kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 22 21:53:29 fw kernel: Adding Swap: 32764k swap-space (priority -1)
Jan 22 21:53:29 fw kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 22 21:53:29 fw kernel: ip_conntrack version 2.1 (4023 buckets, 32184 max) - 308 bytes per conntrack
Jan 22 21:53:29 fw kernel: ip_conntrack_pptp version 1.9 loaded
Jan 22 21:53:29 fw kernel: ip_nat_pptp version 1.5 loaded
Jan 22 21:53:29 fw kernel: usb-uhci.c: $Revision: 1.275
Jan 22 21:53:29 fw kernel: usb-uhci.c: High bandwidth mode enabled
Jan 22 21:53:29 fw kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 22 21:53:29 fw kernel: Intel(R) PRO/1000 Network Driver - version 7.6.12
Jan 22 21:53:29 fw kernel: Copyright (c) 1999-2007 Intel Corporation.
Jan 22 21:53:29 fw kernel: e1000: 03:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:44:bd:3c
Jan 22 21:53:29 fw kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Jan 22 21:53:29 fw kernel: e1000: 03:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:44:bd:3d
Jan 22 21:53:29 fw kernel: e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
Jan 22 21:53:29 fw kernel: e1000: 04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:44:bd:3e
Jan 22 21:53:29 fw kernel: e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
Jan 22 21:53:29 fw kernel: e1000: 04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:44:bd:3f
Jan 22 21:53:29 fw kernel: e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
Jan 22 21:53:29 fw kernel: e1000: eth1: e1000_request_irq: Unable to allocate interrupt Error: -16
Jan 22 21:53:29 fw kernel: e1000: eth1: e1000_request_irq: Unable to allocate interrupt Error: -16
Jan 22 21:53:30 fw kernel: e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
Jan 22 21:53:31 fw dnsmasq[429]: started, version 2.38 cachesize 150
Jan 22 21:53:31 fw dnsmasq[429]: compile time options: no-IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N TFTP
Jan 22 21:53:31 fw dnsmasq[429]: reading /var/state/dhcp/dhcpd.leases
Jan 22 21:53:31 fw dnsmasq[429]: reading /etc/resolv.conf
Jan 22 21:53:31 fw dnsmasq[429]: ignoring nameserver 127.0.0.1 - local interface
Jan 22 21:53:31 fw dnsmasq[429]: read /etc/hosts - 7 addresses
Jan 22 21:53:31 fw ipcop: Starting RED device eth3.
Jan 22 21:53:32 fw dnsmasq[474]: started, version 2.38 cachesize 150
Jan 22 21:53:32 fw dnsmasq[474]: compile time options: no-IPv6 GNU-getopt ISC-leasefile no-DBus no-I18N TFTP
Jan 22 21:53:32 fw dnsmasq[474]: reading /var/state/dhcp/dhcpd.leases
Jan 22 21:53:32 fw dnsmasq[474]: reading /var/ipcop/red/resolv.conf
Jan 22 21:53:32 fw dnsmasq[474]: using nameserver 195.238.2.22#53
Jan 22 21:53:32 fw dnsmasq[474]: using nameserver 195.238.2.21#53
Jan 22 21:53:32 fw dnsmasq[474]: read /etc/hosts - 7 addresses
Jan 22 21:53:33 fw rc.updatered: pid 442 end
Jan 22 21:53:34 fw fcron[551]: fcron[551] 3.0.1 started
Jan 22 21:53:34 fw fcron[551]: updating configuration from /var/spool/cron
Jan 22 21:53:34 fw fcron[551]: adding file root
Jan 22 21:53:35 fw dhcpd: Wrote 54 leases to leases file.
Jan 22 21:53:35 fw dhcpd:
Jan 22 21:53:35 fw dhcpd: No subnet declaration for eth1 (0.0.0.0).
Jan 22 21:53:35 fw dhcpd: ** Ignoring requests on eth1. If this is not what
Jan 22 21:53:35 fw dhcpd: you want, please write a subnet declaration
Jan 22 21:53:35 fw dhcpd: in your dhcpd.conf file for the network segment
Jan 22 21:53:35 fw dhcpd: to which interface eth1 is attached. **
Jan 22 21:53:35 fw dhcpd:
Jan 22 21:53:36 fw sshd[576]: Server listening on 0.0.0.0 port 222.
Jan 22 21:53:37 fw dhcpd: DHCPDISCOVER from 00:0e:a6:8e:88:aa via eth0
Jan 22 21:53:38 fw dhcpd: DHCPOFFER on 192.168.1.254 to 00:0e:a6:8e:88:aa (laptop) via eth0
Jan 22 21:53:38 fw dhcpd: DHCPREQUEST for 192.168.1.254 (192.168.1.1) from 00:0e:a6:8e:88:aa (laptop) via eth0
Jan 22 21:53:38 fw dhcpd: DHCPACK on 192.168.1.254 to 00:0e:a6:8e:88:aa (laptop) via eth0
Jan 22 21:53:39 fw dnsmasq[474]: reading /var/state/dhcp/dhcpd.leases
Jan 22 21:53:50 fw squid[589]: Squid Parent: child process 591 started
Jan 22 21:53:50 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 21:53:50 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 21:53:50 fw ipcop: IPCop started.
Jan 22 21:53:50 fw init: Entering runlevel: 3
Jan 22 21:53:53 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 21:53:53 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 21:55:00 fw fcron[627]: Job [ -f "/var/ipcop/red/active" ] && /usr/local/bin/setddns.pl started for user root (pid 628)
Jan 22 21:55:00 fw fcron[629]: Job /usr/local/bin/makegraphs >/dev/null started for user root (pid 630)
Jan 22 21:55:00 fw fcron[632]: Job /usr/local/bin/timecheck > /dev/null 2>&1 started for user root (pid 634)
Jan 22 21:55:02 fw fcron[627]: Job [ -f "/var/ipcop/red/active" ] && /usr/local/bin/setddns.pl completed
Jan 22 21:55:02 fw fcron[632]: Job /usr/local/bin/timecheck > /dev/null 2>&1 completed
Jan 22 21:55:29 fw fcron[629]: Job /usr/local/bin/makegraphs >/dev/null completed
Jan 22 21:55:31 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 21:55:31 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 21:55:34 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 21:55:34 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 21:55:52 fw sshd[649]: Accepted password for root from 192.168.1.254 port 2640 ssh2
Jan 22 21:55:52 fw sshd[649]: subsystem request for sftp
Jan 22 21:57:13 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 21:57:13 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 21:57:17 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 21:57:17 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 21:58:57 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 21:58:57 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 21:59:00 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 21:59:00 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:00:00 fw fcron[652]: Job [ -f "/var/ipcop/red/active" ] && /usr/local/bin/setddns.pl started for user root (pid 653)
Jan 22 22:00:00 fw fcron[654]: Job /usr/local/bin/makegraphs >/dev/null started for user root (pid 655)
Jan 22 22:00:00 fw fcron[657]: Job /usr/local/bin/timecheck > /dev/null 2>&1 started for user root (pid 659)
Jan 22 22:00:02 fw fcron[652]: Job [ -f "/var/ipcop/red/active" ] && /usr/local/bin/setddns.pl completed
Jan 22 22:00:02 fw fcron[657]: Job /usr/local/bin/timecheck > /dev/null 2>&1 completed
Jan 22 22:00:12 fw fcron[654]: Job /usr/local/bin/makegraphs >/dev/null completed
Jan 22 22:00:28 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 22:00:28 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:00:31 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 22:00:31 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:02:18 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 22:02:18 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:02:22 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 22:02:22 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:03:44 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 22:03:44 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:03:47 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 22:03:47 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:05:00 fw fcron[674]: Job [ -f "/var/ipcop/red/active" ] && /usr/local/bin/setddns.pl started for user root (pid 675)
Jan 22 22:05:00 fw fcron[676]: Job /usr/local/bin/makegraphs >/dev/null started for user root (pid 677)
Jan 22 22:05:00 fw fcron[680]: Job /usr/local/bin/timecheck > /dev/null 2>&1 started for user root (pid 681)
Jan 22 22:05:02 fw fcron[674]: Job [ -f "/var/ipcop/red/active" ] && /usr/local/bin/setddns.pl completed
Jan 22 22:05:02 fw fcron[680]: Job /usr/local/bin/timecheck > /dev/null 2>&1 completed
Jan 22 22:05:12 fw fcron[676]: Job /usr/local/bin/makegraphs >/dev/null completed
Jan 22 22:05:32 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 22:05:32 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:05:36 fw dhcpd: DHCPINFORM from 192.168.1.254 via eth0
Jan 22 22:05:36 fw dhcpd: DHCPACK to 192.168.1.254 (00:0e:a6:8e:88:aa) via eth0
Jan 22 22:06:09 fw kernel: e1000: eth0: e1000_watchdog_task: NIC Link is Down
Jan 22 22:09:23 fw kernel: e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
Jan 22 22:09:28 fw dhcpd: DHCPREQUEST for 192.168.1.254 from 00:0e:a6:8e:88:aa (laptop) via eth0
Jan 22 22:09:28 fw dhcpd: DHCPACK on 192.168.1.254 to 00:0e:a6:8e:88:aa (laptop) via eth0
Jan 22 22:09:31 fw dnsmasq[474]: reading /var/state/dhcp/dhcpd.leases
Jan 22 22:09:31 fw sshd[696]: Accepted password for root from 192.168.1.254 port 3141 ssh2
Jan 22 22:09:31 fw sshd[696]: subsystem request for sftp
Jan 22 21:53:35 fw dhcpd:
Jan 22 21:53:35 fw dhcpd: No subnet declaration for eth1 (0.0.0.0).
Jan 22 21:53:35 fw dhcpd: ** Ignoring requests on eth1. If this is not what
Jan 22 21:53:35 fw dhcpd: you want, please write a subnet declaration
Jan 22 21:53:35 fw dhcpd: in your dhcpd.conf file for the network segment
Jan 22 21:53:35 fw dhcpd: to which interface eth1 is attached. **
Jan 22 21:53:35 fw dhcpd:


then acquired by conscience, I went to see the contents of dhcpd.conf
Code:
ddns-update-style none;
deny bootp;   #default
authoritative;

subnet 192.168.1.0 netmask 255.255.255.0 #GREEN
{
   range 192.168.1.2 192.168.1.254;
   option subnet-mask 255.255.255.0;
   option domain-name "reseau.xxxxx.be";
   option routers 192.168.1.1;
   option domain-name-servers 192.168.100.10;
   option netbios-name-servers 192.168.100.10;
   default-lease-time 3600;
   max-lease-time 7200;
} #GREEN

subnet 192.168.2.0 netmask 255.255.255.0 #BLUE
{
   range 192.168.2.100 192.168.2.254;
   option subnet-mask 255.255.255.0;
   option domain-name "habitantes.xxxxx.be";
   option routers 192.168.2.1;
   option domain-name-servers 192.168.2.1;
   option netbios-name-servers 192.168.100.10;
   default-lease-time 3600;
   max-lease-time 7200;
} #BLUE

Reply With Quote
  #2  
Old 02-02-2010
Member
 
Join Date: May 2008
Posts: 1,307
Re: eth1 - SIOCSIFFLAGS Device or resource busy

Which kernel do you use to boot? I think you selected the 4th choice acpi + ht.

Should we change to /boot/grub/grub.conf part acpi = ht in pci = acpi (or see none).

acpi = ht disables some of the acpi bios and modern machines are tested again without acpi and contain bugs that side. So use acpi completely and it is best to test without acpi = ht

ACPI Kernel Parameters

[TABLE="2"]acpi=off This parameter disables the whole ACPI system. This may prove very useful, for example, if your computer does not support ACPI or if you think the ACPI implementation might cause some problems.
acpi=force Activates the ACPI system even if your computer BIOS is prior to 2000. This parameter overwrites acpi=off and can also be used with current hardware if the ACPI support is not activated despite apm=off.
"pci=noacpi" + "acpi=noirq" This parameter disables the PCI IRQ routing in the new ACPI system.
pci=acpi This parameter activates the PCI IRQ routing in the new ACPI system.
acpi_irq_balance ACPI is allowed to use PIC interrupts to minimize the common use of IRQs.
acpi_irq_nobalance ACPI is not allowed to use PIC interrupts.
acpi_irq_pci=irq-number List of IRQs that can be used by PCI.
acpi_irq_isa=irq-number List of IRQs that cannot be used by PCI.
acpi=oldboot Deactivates the ACPI system almost completely; only the components required for the boot process will be used.
acpi=ht Deactivates the ACPI system almost completely; only the components required for hyper threading will be used. [/TABLE]

APIC Kernel Parameters

[TABLE="2"]apic This parameter instructs the kernel to use the APIC system.
noapic This parameter instructs the kernel not to use the APIC system.
"apic=verbose" + "apic=debug" Modify the quantity of information delivered by the APIC system on start.
lapic Activates the local APIC system even if it is disabled in the BIOS.
nolapic Disables the local APIC system even if it is activated in the BIOS. [/TABLE]

See http://en.opensuse.org/SDB:Kernel_Pa..._for_ACPI/APIC for more details
__________________
Broadband Unlimited Plans
Reply With Quote
  #3  
Old 02-02-2010
Member
 
Join Date: Jan 2010
Posts: 324
Re: eth1 - SIOCSIFFLAGS Device or resource busy

Thank you for the interest that you brought to my worries. Unfortunately, this does not solve my problem. Having removed acpi = ht or by replacing the pci = acpi issues remain the same. I wonder if something is not screwed up in the updates because I can read 2x .18. Would not it be wiser to pick up some config files and re-install from scratch? This does not please me more than that because I have to reconfigure squid, the blue area, ...
Reply With Quote
  #4  
Old 02-02-2010
Member
 
Join Date: May 2008
Posts: 1,307
Re: eth1 - SIOCSIFFLAGS Device or resource busy

Quote:
I wonder if something is not screwed up in the updates because I can read 2x .18.
I removed the lock on the application of the same update. We can now apply the same update several times, its tested like that. I think the problem is the updated e1000 driver to 7.6.12 in 1.4.17. But that does not appear very clearly in the changelog of 7.6.12.
Quote:
FIXES
compile fixes for newer kernels.
ethtool fix for flow control settings when resetting auto-negotiation.
avoid excessive ethtool or mii-tool generated PHY reads while autonegotiating, could cause no-link condition.

FEATURES
copy netdev feature flags to vlan devices to enable TSO or TCP checksum offload on vlan transmits.
Update 7.6.15:
Quote:
- new 2.6.24 compatibility
- [FIX] use return values directly from pci_resource*
from Ben Herrenschmidt, he noticed on ppc64 kernels running on 32
bit userspace, that some of the values returned here are
truncated by the size of our variables.
- fix 2.4 kernel build error
- [FEATURE] update some stats in real time
- various flag cleanups
- [FEATURE] user can now modify InterruptThrottleRate settings using ethtool -C rx-usecs N
- [FIX] reduce binary size by making register test a function
- [FIX] disabling TSO while vlans are enabled causes a panic
- [FIX] semaphore fixes for ES2LAN (ESB2) phy access
- [FEATURE] alternate MAC address support for ES2LAN(ESB2)
- [FIX] resolve MDIC timeouts when resetting ESB2 parts if the internal BMC is enabled
- [FIX] serdes link issues
Update 7.6.15.4
Quote:
there is no marked
It should return to the previous version contained in update 1.4.13.
Here's what you can do to just return to the previous version of e1000

Copy Update 1.4.13 in /var/patches as patch.gpg name (no matter the name, but it must be consistent in the commands below)
Code:
/usr/bin/gpg --batch  --homedir /root/.gnupg -o /var/patches/patch-1.tgz --decrypt /var/patches/patch.gpg
# ls /var/patches must show patch-1.tgz and patch.gpg
rm /var/patches/patch.gpg;# make a place

cd /var/patches; tar zxf patch-1.tgz
# ls /var/patches must show setup,information and patch.tar.gz
rm /var/patches/patch-1.tgz;# still makes the place

cd /var/patches; tar zvxf patch.tar.gz -C / lib/modules/2.4.34*/kernel/drivers/net/e1000/e1000.o.gz

# normally you have 2 modules (normal and smp) extracts

# restart the system by reloading the module restored
/usr/local/bin/restartnetwork
and then defer especially if this changed something.
__________________
Broadband Unlimited Plans
Reply With Quote
Reply

  TechArena Community > Technology > Networking & Security
Tags: , , , ,



Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads for: "eth1 - SIOCSIFFLAGS Device or resource busy"
Thread Thread Starter Forum Replies Last Post
DNS Server Error: "Windows can't communicate with the device or resource" Delightful. Operating Systems 3 20-01-2011 06:51 PM
The remote device or resource won't accept the connection snav Technology & Internet 1 22-10-2010 12:51 AM
Error the remote device or resource won't accept the connection on Vista to Windows 7 Narragansett Technology & Internet 6 14-08-2010 03:23 AM
The remote device or resource is not accepting the connection. Agneya Technology & Internet 5 15-06-2010 07:41 PM
device eth1 has different mac address than expected LinuxeD Operating Systems 3 07-08-2009 07:18 PM


All times are GMT +5.5. The time now is 09:33 PM.