Results 1 to 4 of 4

Thread: Airport Error 6753

  1. #1
    Join Date
    Jul 2009
    Posts
    95

    Airport Error 6753

    Hi,

    I recently bought Airport Express , I am trying to configure the Airport Extreme base station using the AirPort Utility, I cannot get the internet to work. The computer recognizes the signal and connects to my network, but the current Internet does not work. I installed AirPort Utility and tried to see what was wrong, but when the press is still, I get error message"An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again error -6753 " What exactly does this error message mean?

  2. #2
    Join Date
    Dec 2007
    Posts
    845

    Re: Airport Error 6753

    I was getting the same error 6753 before, what I did was :

    1) Open Network Connections-> Local Area Connection-> Properties-> Internet Protocol (TCP / IP) Properties
    2) Note the current configuration
    3) Change the IP address of 169.254.22.5 (doesn't matter how long the first 3 numbers match with the airport, and the fourth is different). I left my subnet mask 255.255.255.0 and the gateway at 192.168.0.1.
    4) "OK" is selected, the Internet connection must be temporarily out of the airport administration, but it must be able to connect.
    5) While changing the configuration, make sure that the airport will have a reachable IP address either via DHCP or manual configuration that is a subnet.
    6) Save the changes at the airport
    7) Go to the Properties of TCP / IP on your PC and restore the original configuration

  3. #3
    Join Date
    May 2008
    Posts
    317

    Re: Airport Error 6753

    The problem can be solved by the addition of Microsoft TCP / IP version 6 protocol in the network device or change the IP address in order to allow the airport operator to connect. By changing the settings, airports should always have access to a detected IP address either via DHCP or manual setting of the subnet.

  4. #4
    Join Date
    May 2008
    Posts
    209

    Re: Airport Error 6753

    I have something better, in which the computer creates only use the Ethernet port. Add all the other things - Wireless USB - later. Furthermore, the usefulness of Bonjour, which can be downloaded from the Apple support site is very helpful in creating the printer. If you want to see what the IP address of the airport is in fact you can go to Start, Run, type CMD (see a DOS window), type "ipconfig" (without quotes) and see an IP address for "gateway default. That is the direction of the airport, when you have to use the "other". Similarly, the "ipconfig / all" (without quotation marks) will give the IP addresses of all devices connected to the airport.

Similar Threads

  1. Airport Express Error 10057
    By Justin23 in forum Networking & Security
    Replies: 5
    Last Post: 17-02-2010, 12:12 AM
  2. Airport Express Error 3256
    By avit in forum Networking & Security
    Replies: 5
    Last Post: 16-02-2010, 12:58 AM
  3. AirPort Express Error : Bad param error -4
    By savio in forum Networking & Security
    Replies: 5
    Last Post: 12-02-2010, 01:27 AM
  4. Replies: 5
    Last Post: 12-02-2010, 12:46 AM
  5. Network driver problem of HP DV PAVILION 6753 CL
    By Balamohan in forum Networking & Security
    Replies: 3
    Last Post: 02-12-2009, 03:17 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,711,644,697.45841 seconds with 17 queries