I have two XP sp3 machines in my network. Data transfer between them caps at 1 MB/s. This is very odd since both machines have tested at speedtest.net at 15M down and 1M up. Why is my network transfer so slow? What can i try.
A little about my network. All cable is new cat 5. There are 10/100 NIC in each machine set to 100 Full Duplex. I have tried setting the NIC to "Auto Negotiate" with no speed increase. Both machines have static IP's assigned. All anti-virus and firewalls are off. Both machines are on the same workgroup and can see each other.
Cable modem connects to a Linksys WRT54GP2 router with built in 10/100 switch.
Machine "A" connects from router through a set of Netgear HDX101 Powerline HD Ethernet Adapters then to the machine. (I have also tried bypassing the Powerlines and transferring the data over WIFI. I only get up to 1.5 MB/s transfer speed. My WIFI says im getting 54 MB/s. I was hopping to see near 25 at least.)
Machine "B" connects directly to the router via cat 5.
I also have a MacBook on network too. It's wifi also suffers from the same transfer rate. If the xp-xp fix doesn't also fix the MacBook i will open a new post about it.
I do not have enough cable for the distance im making up with the powerlines.
Cesar
Bookmarks