Cisco pix firmware

[Yancy]

Hi,
I want to the firmware of my Cisco Pix 506 E. I don't have any idea how to update it? Can someone help?

Thank you for all suggestions.

[Snake08]

You need not worry about it. The Cisco PIX 501 firmware will automatically update by itself. You will not have to perform this by yourself. If you are facing any problem then you can go to the website for more details. I hope it helps.

[Spyrus]

You can login to the Cisco site and get registered. There you will get all the information related to firmware and updates.

[Milton.J]

Try the following process:

• Download the latest IOS version from http://www.cisco.com. (You can access the software download section only when you have a Cisco Connection Online—CCO—account.)
• Place the update file (i.e., pixxxx.bin) on a Trivial File Transfer Protocol (TFTP) server.
• Connect to your Cisco Secure PIX Firewall 515 through Telnet or through a terminal session.
• Boot the machine. When the system prompts you to press <break> to interrupt the boot process, press Esc and stop the boot. (When the flash is complete, the PIX will reboot.)
• Enter the IP address of the PIX's NIC, as follows:

  address <xxx.xxx.xxx.xxx>

• Enter the IP address of the TFTP server, as follows:

  server <xxx.xxx.xxx.xxx>

• Enter the filename for the updated IOS version, as follows:

  file <pixxxx>.bin

• To begin the download, type: tftp

Source: windowsitpro.com